Service Manual
Table Of Contents
- Precision 3260 Compact Service Manual
- Contents
- Working inside your computer
- Removing and installing components
- Recommended tool
- Screw list
- Major components of Precision 3260 Compact
- Side cover
- 2.5-inch hard drive
- Riser card
- Wireless card
- Speaker
- Processor fan
- Memory module
- M.2 solid-state drive
- Removing the M.2 2230 PCIe solid-state drive (slot-1)
- Installing the M.2 2230 PCIe solid-state drive (slot-1)
- Removing the M.2 2280 PCIe solid-state drive (slot-1)
- Installing the M.2 2280 PCIe solid-state drive (slot-1)
- Removing the M.2 2230 PCIe solid-state drive (slot-0)
- Installing the M.2 2230 PCIe solid-state drive (slot-0)
- Removing the M.2 2280 PCIe solid-state drive (slot-0)
- Installing the M.2 2280 PCIe solid-state drive (slot-0)
- Expansion card
- Optional I/O module
- Coin-cell battery
- Heat sink
- SATA FFC module
- Processor
- System board
- Internal antenna
- Drivers and downloads
- BIOS setup
- Troubleshooting
- Getting help and contacting Dell
Table 14. System setup options—System Management menu (continued)
System Management
SERR Messages Enable or disable SERR messages.
By default, the option is enabled.
First Power On Date
Set Ownership Date Allows to set the Ownership date.
By default, the option is disabled.
Diagnostic
OS Agent Requests Enable or disable the Dell OS Agent(s) capability of scheduling onboard
diagnostics on a subsequent boot which helps assist in the prevention and
resolution of hardware related issues.
By default, this option is enabled.
Power-on-Self-Test Automatic
Recovery
Enable or disable the Power-on-Self-Test automatic recovery option.
By default, the option is enabled.
Table 15. System setup options—Keyboard menu
Keyboard
Keyboard Errors
Enable Keyboard Error Detection Enable or disable the keyboard error detection.
By default, the option is enabled.
Numlock LED
Enable Numlock LED Enable or disable Numlock LED.
By default, the option is enabled.
Device Configuration Hotkey Access
Device Configuration Hotkey Access Enable or disable users to access device configuration by using hotkeys.
By default, the option is enabled.
Table 16. System setup options—Pre-boot Behavior menu
Pre-boot Behavior
Adapter Warnings
Enable Adapter Warnings Enable or disable the adapter warning messages.
By default, the option is enabled.
Warning and Errors Enable or disable the action to be done when a warning or error is encountered.
By default, the Prompt on Warnings and Errors option is enabled.
Fastboot Enable to set the speed of the boot process.
By default, the Minimal option is enabled.
Extend BIOS POST Time Set the BIOS POST time.
By default, the 0 seconds option is enabled.
Table 17. System setup options—Virtualization menu
Virtualization
Intel Virtualization Technology
BIOS setup 85