Owner`s manual

Removing the Power-Adapter

Port

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before Working Inside Your Computer. After working inside your

computer, follow the instructions in After Working Inside Your

Computer. For more safety best practices, see the Regulatory

Compliance home page at dell.com/regulatory_compliance.

Prerequisites

1 Follow the procedure from step 1 to step 5 in “Removing the Stand

Assembly”.

2 Remove the back cover.

3 Remove the system-board shield.

4 Remove the VESA-mount bracket.

Procedure

1 Note the routing of the power-adapter port cable on the system board.

2 Disconnect the power-adapter port cable from the system board.

3 Remove the screw that secures the power-adapter port to the bracket on

the display-panel base.