Owner`s manual

Replacing the Coin-Cell

Battery

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before Working Inside Your Computer. After working inside your

computer, follow the instructions in After Working Inside Your

Computer. For more safety best practices, see the Regulatory

Compliance home page at dell.com/regulatory_compliance.

Procedure

1 With the positive side facing up, insert the new coin-cell battery (CR2032)

into the battery socket and snap the battery into place.

2 Snap the protective cover to the coin-cell battery.

Post-requisites

1 Replace the heat sink.

2 Replace the system-board shield.

3 Replace the back cover.

4 Follow the procedure from step 3 to step 5 in “Replacing the Stand

Assembly”.