Dell™ 2009W Flat Panel Monitor User's Guide About Your Monitor Product Features Identifying Parts and Controls Monitor Specifications Universal Serial Bus (USB) Interface Plug and Play Capability Maintenance Guidelines Setting Up the Monitor Attaching the Stand Connecting the Monitor Organizing the Cables Attaching the Soundbar (Optional) Removing the Stand Solving Problems Troubleshooting Your Monitor Common Problems Product Specific Problems Universal Serial Bus (USB) Specific Problems Troubleshooting t
Back to Contents Page About Your Monitor Dell™ 2009W Flat Panel Monitor User's Guide Product Features Identifying Parts and Controls Monitor Specifications Universal Serial Bus (USB) Interface Plug and Play Capability Maintenance Guidelines Product Features The Dell™ 2009W flat panel display has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■ 20-inch (508 mm) viewable area display.
Brightness & Contrast/Down (-) button 4 Auto-adjust/Up (+) button 5 Power button (with power light indicator) Back View Back view Back View with monitor stand Label Description/Use 1 VESA mounting holes (100mm) (Behind attached base plate) Use to mount the monitor. 2 Barcode serial number label Refer to this label if you need to contact Dell for technical support. 3 Security lock slot Use a security lock with the slot to help secure your monitor.
Bottom View Bottom view Bottom view with monitor stand Label Description 1 AC power cord connector 2 DC power connector for Dell Soundbar 3 DVI connector 4 VGA connector 5 USB upstream port 6 USB downstream ports Monitor Specifications The following sections give you information about the various power management modes and pin assignments for various connectors for your monitor.
Pin Assignments VGA Connector Pin 15-pin Side of the Connected Signal Cable Number 1 Video-Red 2 Video-Green 3 Video-Blue 4 GND 5 Self-test 6 GND-R 7 GND-G 8 GND-B 9 Computer 5V/3.
9 TMDS RX1- 10 TMDS RX1+ 11 TMDS Ground 12 Floating 13 Floating 14 +5V/+3.
Universal Serial Bus (USB) Interface This section gives you information about the USB ports that are available on the left side of your monitor. NOTE: This monitor supports High-Speed Certified USB 2.0 interface Transfer speed Data Rate Power Consumption High speed 480 Mbps 2.5W (Max., each port) Full speed 12 Mbps 2.5W (Max., each port) Low speed 1.5 Mbps 2.5W (Max.
Plug and Play Capability You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Dis Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select different settings if desired. F information about changing the monitor settings, see Operating the Monitor.
Back to Contents Page Appendix Dell™ 2009W Flat Panel Monitor User's Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell CAUTION: Safety Instructions CAUTION: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. For information on safety instructions, see the Product Information Guide. FCC Notices (U.S.
Back to Contents Page Operating the Monitor Dell™ 2009W Flat Panel Monitor User's Guide Using the Front Panel Controls Using the On-Screen Display (OSD) Menu Setting the Optimal Resolution Using the Dell Soundbar (Optional) Using the Tilt, Swivel, and Vertical Extension Rotating the monitor Adjusting the Rotation Display Settings of Your System Using the Front Panel Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed.
C Use this button for direct access to the "Brightness" and "Contrast" control menu. Brightness/Contrast Hot Key C and D Use these buttons to navigate and adjust the slider-bar (decrease/increase ranges) controls in the OSD. Down (-) and Up (+) D Use this button to activate automatic setup and adjust menu. The following dialog appears on a black screen as the monitor selfadjusts to the current input: Auto Adjust Auto Adjustment allows the monitor to self-adjust to the incoming video signal.
EXIT Select to exit the main menu. BRIGHTNESS & CONTRAST Use this menu to activate Brightness/Contrast adjustment. Back Push Brightness Brightness adjusts the luminance of the backlight. to go back to the main menu. Push the Contrast button to increase brightness and push the button to decrease brightness (min 0 ~ max 100). Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.
Preset setting submenu Back Push Input Color Format To achieve the different color domain for PC RGB and HD YPbPr (HD YPbPr is suitable for HD video playback over DVI. PC RGB is suitable for normal PC graphics display over DVI). Gamma To achieve the different color mode for PC and Mac. Color Setting mode You can choose between a Graphics and a Video mode. If your computer is connected to your monitor, choose Graphics. If a DVD, STB, or VCR is connected to your monitor, choose Video.
Exit Menu Push to exit the OSD main menu.
Back to Contents Page Setting Up the Monitor Dell™ 2009W Flat Panel Monitor User's Guide Attaching the Stand Connecting the Monitor Organizing the Cables Attaching the Dell Soundbar (optional) Removing the Stand Attaching the Stand NOTE: The stand is detached and extended when the monitor is shipped from the factory. Place the stand on a flat surface and follow these steps to attach the monitor stand: 1. 2. Fit the groove on the back of the monitor to the two tabs on the upper part of the stand.
NOTE: The graphics are used for the purpose of illustration only. Appearance of the computer may vary. After you have completed connecting the DVI/VGA cable, follow the procedure below to connect the USB cable to the computer and complete your monitor setup: l l l l l Connect the upstream USB port (cable supplied) to an appropriate USB port on your computer. Connect USB peripherals to the downstream USB ports (rear or side) on the monitor. (See rear or bottom view for details.
NOTICE: Do not use with any device other than the Dell Soundbar. NOTE: Soundbar Power Connector +12V DC output is for optional Dell Soundbar only. 1. Working from the rear of the monitor, attach the Dell Soundbar by aligning the two slots with the two tabs along the bottom rear of the monitor. 2. Slide the Dell Soundbar to the left until it snaps into place. 3. Connect the Dell Soundbar with the DC power connector. 4.
Back to Contents Page Solving Problems Dell™ 2009W Flat Panel Monitor User's Guide Troubleshooting Your Monitor Common Problems Product Specific Problems Universal Serial Bus Specific Problems Dell™ Soundbar Troubleshooting CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions. Troubleshooting Your Monitor Self-Test Feature Check Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly.
Missing Pixels Stuck-on Pixels Brightness Problems LCD screen has spots l LCD screen has bright spots l Picture too dim or too bright l l l l l Geometric Distortion Screen not centered correctly l l l Cycle power on-off. Pixel that is permanently off is a natural defect that can occur in LCD technology. Cycle power on-off. Pixel that is permanently off is a natural defect that can occur in LCD technology. Reset the monitor to Factory Settings. Auto Adjust via OSD.