Datasheet

Specifications: W-IAP108 and W-IAP109 Wired + Wireless Instant Access Points
W-IAP108
Dell W-Instant IAP108 Wireless Access Point,
802.11a/b/g/n, 2x2:2, dual radio, antenna connectors
This product should be considered as ‘Rest of World’
products and MUST NOT be used for deployments in
the United States, Japan or Israel
W-IAP108-JP
Dell W-Instant IAP108 Wireless Access Point,
802.11a/b/g/n, 2x2:2, dual radio, antenna connectors
Restricted regulatory domain: Japan
W-IAP108-US
Dell W-Instant IAP108 Wireless Access Point,
802.11a/b/g/n, 2x2:2, dual radio, antenna connectors
Restricted regulatory domain: United States
W-IAP109
Dell W-Instant IAP109 Wireless Access Point,
802.11a/b/g/n, 2x2:2, dual radio, integrated antennas
This product should be considered as ‘Rest of World’
products and MUST NOT be used for deployments in
the United States, Japan or Israel
W-IAP109-JP
Dell W-Instant IAP109 Wireless Access Point,
802.11a/b/g/n, 2x2:2, dual radio, integrated antennas
Restricted regulatory domain: Japan
W-IAP109-US
Dell W-Instant IAP109 Wireless Access Point,
802.11a/b/g/n, 2x2:2, dual radio, integrated antennas
Restricted regulatory domain: United States
Dell Part Number & Description
Mounting
Desktop (vertical): Using stand supplied with product
Wall (vertical): Using optional wall mount accessory
Ceiling (horizontal, not recommended for W-IAP109):
Using optional ceiling mount accessories
Mechanical
Dimensions (unit):
Excluding desk mount:
- 160 mm (W) x 43 mm (D) x 160 mm (H)
- 6.30” (W) x 1.69” (D) x 6.30” (H)
With desk mount:
- 181 mm (W) x 72 mm (D) x 160 mm (H)
- 7.13” (W) x 2.83” (D) x 6.30” (H)
Weight (unit): 300 g (.66 lbs)
Excluding desk mount: 385 g (13.6 oz)
With desk mount: 460 g (16.2 oz)
Dimensions (shipping)
230 mm (W) x 220 mm (D) x 90 mm (H)
9.06” (W) x 8.66” (D) x 3.5” (H)
Weight (shipping): 750 g (1.65 lbs)
Environmental
Operating:
Temperature: 0° C to +40° C (+32° F to +104° F)
Humidity: 5% to 95% non-condensing
Storage and transportation:
Temperature: -40° C to +70° C (-40° F to +158° F)
Regulatory
FCC/Industry of Canada
CE Marked
R&TTE Directive 1995/5/EC
Low Voltage Directive 72/23/EEC
EN 300 328
EN 301 489
EN 301 893
UL/IEC/EN 60950
EN 60601-1-1, EN60601-1-2
For more country-specific regulatory information and
approvals, please see your Dell representative.
Certifications
CB Scheme Safety, cTUVus
Wi-Fi certified 802.11a/b/g/n
Warranty
Extended lifetime warranty
Software
Dell W-Series ArubaOS™ 6.2 and later
Dell W-Series Aruba Instant 3.2.0.0
Maximum (aggregate) transmit power (limited by local regulatory
requirements):
2.4-GHz band: +21 dBm
5-GHz bands: +21 dBm
Advanced Cellular Coexistence (ACC) feature to eectively deal
with interference from cellular systems
Maximum ratio combining (MRC) for improved receiver
performance
Cyclic delay diversity (CDD) for improved downlink RF
performance Short guard interval for 20-MHz and 40-MHz
channels
Space time-blocking code (STBC) for increased range and
improved reception
Supported data rates (Mbps):
802.11b: 1, 2, 5.5, 11
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
802.11n: MCS0 to MCS15 (6.5 Mbps to 300 Mbps)
802.11n high-throughput (HT) support: HT 20/40
802.11n packet aggregation: A-MPDU, A-MSDU
Encrypted VPN Throughout
Up to 20 Mbps
Power
Supported power sources:
802.3af (PoE) or 802.3at (PoE+) on uplink Ethernet port
Note: When using PoE, the USB port will be enabled only
when an 802.3at-compliant source is used
12 volts from external power adapter (sold separately)
Maximum power consumption:
Without USB device connected: 12.5 watts
With USB device: 15 watts
Antennas
W-IAP108: Two RP-SMA connectors for external dual-band
antennas
W-IAP109: Four integrated omni-directional antennas for 2x2
MIMO with maximum antenna gain of 5.0 dBi in both 2.4
GHz and 5 GHz. Built-in antennas are optimized for vertical
orientation
Interfaces
Network:
ENET0 (uplink): One 10/100/1000BASE-T Ethernet (RJ-45),
auto-sensing link speed and MDI/MDX
ENET1 (local): One 10/100BASE-T Ethernet (RJ-45),
autosensing link speed and MDI/MDX
One port for DC power connector
One USB 2.0 port (Type A connector)
One serial console interface (RJ-45)
Visual indicators (LEDs):
Power/system status
Ethernet link status (2x)
Radio status (2x)
Kensington security slot
Reset button
RF Performance Table
Maximum transmit power
(dBm) per transit chain
Receiver sensitivity (dBm)
per receive chain
802.11b 2.4 GHz
1 Mbps 18.0 -92.0
2 Mbps 18.0 -92.0
5.5 Mbps 18.0 -90.0
11 Mbps 18.0 -88.0
802.11g 2.4 GHz and 802.11a 5 GHz
6 Mbps 18.0 -88.0
54 Mbps 16.0 -75.0
802.11n HT20 2.4 GHz and 5 GHz
MCS0/8 18.0 -88.0
MCS7/15 14.0 -71.0
802.11n HT40 2.4 GHz and 5 GHz
MCS0/8 18.0 -85.0
MCS7/15 14.0 -68.0
Wireless Radio Specifications
AP type: Dual-radio, dual-band 802.11n indoor
Software-configurable dual radio supports 2.4 GHz and 5 GHz
2x2 MIMO with two spatial streams and up to 300 Mbps wireless
data rate
Supported frequency band (country-specific restrictions apply):
2.4000 GHz to 2.4835 GHz
5.150 to 5.250 GHz
5.250 to 5.350 GHz
5.470 to 5.725 GHz
5.725 to 5.875 GHz
Available channels: Managed by Aruba Instant or Mobility
Controller, depending upon the configured regulatory domain
Supported radio technologies:
802.11b: Direct-sequence spread-spectrum (DSSS)
802.11a/g/n: Orthogonal frequency-division multiplexing
(OFDM)
802.11n: 2x2 MIMO with two spatial streams
Supported modulation types:
802.11b: BPSK, QPSK, CCK
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
Transmit power: Configurable in increments of 0.5 dBm