Troubleshooting guide


Entering Values

When Using the Operator Panel
Using the operator panel, enter the values that you found in the color registration chart to make adjustments.

1. Press Menu button.

2. Press button until Admin Menu appears, and then press (Set) button.

3. Press button until Maintenance appears, and then press (Set) button.

4. Press button until Color Reg Adj appears, and then press (Set) button.

5. Press button until Enter Number appears, and then press (Set) button.

6. Press button until Fast Scan appears, and then press (Set) button.
The cursor is located at the first digit of the Fast Scan.

7. Press or button until you reach the value (for example, +3) displayed on the chart.

8. Press button once and move the cursor to the next value.

9. Repeat steps 7 and 8 to enter all of the digits of the Fast Scan, and then press (Set) button.

10. Press button until Slow Scan appears, and then press (Set) button.
The cursor is located at the first digit of the Slow Scan.

Downloaded from ManualsPrinter.com Manuals