Troubleshooting guide

Back to Contents Page
 Installing the Print Head Device (PHD) Unit and Toner Cartridges
Installing the Print Head Device (PHD) Unit
Installing the Toner Cartridges

Installing the Print Head Device (PHD) Unit

1. Remove the tape from the printer and pull the protective sheet out of the printer.
Installing the Toner Cartridges

1. Open the side cover.

2. Completely remove the eight yellow ribbons.

3. Press and slide the blue latches of four toner cartridges to the locked position.

4. Close the side cover.
CAUTION: Before performing any of the following procedures, read and follow the safety instructions in your Product Information Guide.
Downloaded from ManualsPrinter.com Manuals