User's Manual

Back to Contents Page
 Loading Print Media
Tray 1
Loading Print Media in the Tray 1
Single Sheet Feeder
Loading the Single Sheet Feeder
Manual Duplex Printing
Using the Output Tray
Loading print media properly helps prevent jams and ensures trouble-free printing.
Before loading any print media, identify the recommended print side of the print media. This information is usually on the print media package.
Tray 1

Capacity
The tray 1 can hold:
l 250 sheets of the standard paper.

Print Media Dimensions
The maximum dimensions of print media that the tray 1 can handle are:
l Width - 76.2 mm (3.00 inches) to 215.9 mm (8.5 inches)
l Length - 127 mm (5.00 inches) to 355.6 mm (14.00 inches)
Loading Print Media in the Tray 1

1. Remove the paper tray from the printer.

2. Adjust the paper guides.
NOTE: To avoid paper jams, do not remove the tray while printing is in progress.
NOTE: Use only laser print media. Do not use ink jet paper in the printer.