User's Manual


TCP/IP Settings
Purpose:
To configure TCP/IP settings.
Values:

Tray Settings
Purpose:
To specify the paper types and sizes for tray 1 respectively.
Values:
IP Address
Mode
AutoIP*
Automatically sets the IP address.
A random value in the range of 169.254.1.0 to 169.254.254.255 that is not currently in use on the network is set as the IP
address. The subnet mask is set as 255.255.0.0.
DHCP
Sets the IP address using DHCP.
BOOTP
Sets the IP address using BOOTP.
RARP
Sets the IP address using RARP.
Manually
Set
Manually sets the IP address.
IP Address
Manually sets the IP address allocated to the printer.
It is allocated to the printer using the format nnn.nnn.nnn.nnn. Each octet that makes up nnn.nnn.nnn.nnn is a value in the
range of 0 to 254. 127 and any value in the range of 224 to 254 cannot be specified for the first octet of a gateway address.
Subnet Mask
Manually sets the subnet mask.
It is specified using the format nnn.nnn.nnn.nnn. Each octet that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to
255. 255.255.255.255 cannot be specified as the subnet mask.
Gateway Address
Manually sets the gateway address.
It is specified using the format nnn.nnn.nnn.nnn. Each octet that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to
254. 127 and any value in the range of 224 to 254 cannot be specified for the first octet of a gateway address.
Apply New Settings
After you complete the settings, press the Apply New Settings button to apply the changes.
Restart printer to apply
new settings
Press the Restart printer to apply new settings button to apply the changes.
Paper Type
Plain*
Specifies the type of paper loaded in the tray 1.
Plain Thick
Covers
Covers Thick
Label
Recycled
Envelope
Plain S2
Plain Thick S2
Covers S2
Recycled S2
Paper Size
A4*
Specifies the size of paper loaded in the tray 1.
A5
B5
Letter
Folio
Legal
Executive
Monarch
Monarch LEF
DL
DL LEF
C5
Envelope #10