User's Manual

Place a single document face down on the document glass.
For details about loading a document, see "Loading an Original Document".

2. Press until >COPY appears, and then press .

3. Press until Collated appears.

4. Press to select Collated, and then press .

5. If necessary, customize the copy settings including the number of copies, contrast, and image quality. See "Setting Copy Options".

6. Press to begin copying.
For the document loaded on the document glass, the display asks if you want to load another page. Press to select Yes or No, and then press .

7. If you select Yes, press to select Continue or Cancel, and then press .

Margin Top/Bottom
Specifies the top and bottom margins of the copy.

1. Load the document to be copied on the document glass, and close the cover.

2. Press until >COPY appears, and then press .

3. Press until Margin Top/Bottom appears.

4. Specify the desired value using the number keypad, and then press .

5. Press to begin copying.

Margin Left/Right
Specifies the left and right margins of the copy.

1. Load the document to be copied on the document glass, and close the cover.

2. Press until >COPY appears, and then press .

3. Press until Margin Left/Right appears.

4. Use ten key to specify the desired value, and then press .

5. Press to begin copying.

Margin Middle
Specifies the middle margin of the copy.

1. Load the document to be copied on the document glass, and close the cover.

0.2 inch* (4 mm*)
Specify the value in increments of 0.1 inch (1 mm).
0.0-2.0 inch (0-50 mm)
0.2 inch* (4 mm*)
Specify the value in increments of 0.1 inch (1 mm).
0.0-2.0 inch (0-50 mm)