User Guide

ManualsBrandsDell ManualsOther2145cn

Table Of Contents

Features of your new laser printer
Safety information
Contents
Introduction
- Printer overview
  - Front view
  - Rear view
- Control panel overview
- Understanding the Status LED
- Acknowledging the status of the toner cartridge
- Menu overview
- Supplied software
- Printer driver features
  - Printer driver
  - PostScript driver
Getting started
- Setting up the hardware
- Printing a demo page
- Setting up the network
- System requirements
- Installing the software
- Printer's basic settings
Loading originals and print media
- Loading originals
  - On the scanner glass
  - In the DADF
- Selecting print media
- Changing the size of the paper in the paper tray
- Loading paper
  - Loading paper in the tray 1 or optional tray
  - Loading paper in the multi-purpose tray
- Adjusting the output support
  - For Letter-sized paper
  - For A4- or Legal-sized paper
- Setting the paper size and type
Copying
- Selecting the paper tray
- Copying
- Changing the settings for each copy
- Changing the scan size settings
- Changing the default copy settings
- ID card copying
- Using special copy features
- Printing on both sides of paper
- Setting copy timeout
Scanning
- Scanning basics
- Scanning from the control panel
  - Setting scan information in Dell Scan Manager.
  - Scanning to application programs
- Scanning by a network connection
- Changing the settings for each scan job
- Changing the default scan settings
- printing scan confirmation report automatically
- Setting up address book
- Scan on both sides of paper
Basic printing
- Printing a document
- Canceling a print job
Faxing
- Sending a fax
- Receiving a fax
- Other ways to fax
- Fax setup
Using USB flash memory
- About USB memory
- Plugging in a USB memory device
- Scanning to a USB memory device
  - Scanning
  - Customizing scan to USB
- Printing from a USB memory device
  - To print a document from a USB memory device:
- Backing up data
  - Backing up data
  - Restoring data
- Managing USB memory
Maintenance
- Printing reports
  - Printing a report
- Adjusting the color contrast
- Using toner low alert
- Clearing memory
- Cleaning your printer
- Maintaining the cartridge
- Replacing the toner cartridge
  - Clearing the Toner Empty message
- Replacing the paper transfer belt
- Maintenance parts
  - Checking replaceables
  - Replacing the DADF rubber pad
- Managing your printer from the website
  - To access Embedded Web Service:
- Checking the printer’s serial number
Troubleshooting
- Tips for avoiding paper jams
- Clearing document jams
- Clearing paper jams
- Understanding display messages
- Solving other problems
Ordering supplies and accessories
- Supplies
- Accessories
- How to purchase
Installing accessories
- Precautions to take when installing accessories
- Activating the added accessories in printer properties
- Upgrading a memory module
  - Installing a memory module
- Using the hard disk
Specifications
- General specifications
- Printer specifications
- Scanner specifications
- Copier specifications
- Facsimile specifications
Appendix
- Dell Technical Support Policy
- Contacting Dell
- Warranty and Return Policy
Glossary
Index
Software section
- Software section Contents
- Installing Printer Software in Windows
- Basic Printing
- Advanced Printing
- Using Windows PostScript Driver
  - Printer Settings
    - Advanced
    - Using Help
- Sharing the Printer Locally
  - Setting Up a Host Computer
  - Setting Up a Client Computer
- Scanning
- Using other software
- Using Your Printer in Linux
- Using Your Printer with a Macintosh
- Software section Index
  - A
  - B
  - C
  - D
  - F
  - G
  - H
  - I
  - L
  - M
  - N
  - O
  - P
  - S
  - T
  - U
  - W

30 | Loading originals and print media

SETTING THE PAPER SIZE AND TYPE

After loading paper in the paper tray, you need to set the paper size and

type using the control panel buttons. These settings will apply to Copy and

Fax modes. For printing from your computer, you need to select the paper

size and type in the application program you use on your PC.

1. Press Menu () until System Setup appears on the bottom line of the

display and press OK.

2. Press the left/right arrow until Paper Setup appears and press OK.

3. Press OK when Paper Size appears.

4. Press the left/right arrow until the paper tray you want appears and

press OK.

5. Press the left/right arrow until the paper size you are using appears and

press OK.

6. Press Back () to return to the upper level.

7. Press the left/right arrow until Paper Type appears and press OK.

8. Press the left/right arrow until the paper type you are using appears and

press OK.

9. Press Stop/Clear () to return to Ready mode.

If you want to use special sized paper such as a billing paper, select

Custom in the Paper tab in the printer propeties. See Software

section.