User`s guide
Table Of Contents
- Dell™ 2150cn/2150cdn Color Printer
- User's Guide
- Before Beginning
- Setting up the Printer (Printer Setup)
- Preparing Printer Hardware
- Installing Optional Accessories
- Connecting Your Printer
- Setting the IP Address
- Loading Paper
- Installing Printer Drivers on the Windows Computers
- Installing Printer Drivers on the Macintosh Computers
- Installing Printer Drivers on the Linux Computers (CUPS)
- Using Your Printer
- Dell Printer Configuration Web Tool
- Print Media Guidelines
- Loading Print Media
- Operator Panel
- Printing
- Know Your Printer
- Understanding the Tool Box Menus
- Understanding the Printer Menus
- Understanding Your Printer Software
- Understanding Fonts
- Understanding Printer Messages
- Printing With Web Services on Devices (WSD)
- Specifications
- Maintaining Your Printer
- Maintaining Your Printer
- Removing Options
- Clearing Jams
- Troubleshooting
- Troubleshooting Guide
- Basic Printer Problems
- Display Problems
- Printing Problems
- Print Quality Problems
- The output is too light
- Toner smears or print comes off
- Random spots/Blurred images
- The entire output is blank
- Streaks appear on the output
- Part or the entire output is black
- Pitched color dots
- Vertical blanks
- Ghosting
- Light-induced fatigue
- Fog
- Bead-Carry-Out (BCO)
- Jagged characters
- Banding
- Auger mark
- Wrinkled/Stained paper
- Damage on the leading edge of paper
- Jam/Alignment Problems
- The top and side margins are incorrect
- Color registration is out of alignment
- Images are skewed
- Standard 250-Sheet Tray Misfeed Jam
- SSF Misfeed Jam
- Optional 250-Sheet Feeder Misfeed Jam
- Regi Jam (Exit Sensor On JAM)
- Exit Jam (Exit Sensor Off JAM)
- Standard 250-Sheet Tray/Optional 250-Sheet Feeder Multi-feed Jam
- SSF Multi-feed Jam
- Noise
- Problems With Installed Optional Accessories
- Other Problems
- Contacting Service
- Troubleshooting Guide
- Appendix
- Index
Dell Printer Configuration Web Tool 199
To initialize NVRAM (non-volatile RAM) for the network feature and reboot
the printer. You can also initialize NVRAM of the printer from Reset Defaults
in the Printer Settings menu.
Val u e s:
Security
The Security tab includes Set Password, SSL/TLS, IPsec, 802.1x and IP
Filter (IPv4).
Set Password
Purpose:
To set or change the password that is required to access the setup parameters of
the printer from the Dell Printer Configuration Web Tool.
Set the password of the operator panel from Panel Lock in the Printer Settings.
This page can also be displayed by clicking Set Password in the Left Frame.
NOTE: To restore the password to the default (NULL), initialize the non-volatile
memory (NVM).
Val u e s:
Initialize NIC
NVRAM Memory and
restart printer.
Click the Start button to initialize NVRAM, revert network
settings to the factory default settings, and reboot the network
capability.
Restart Printer Click the Start button to reboot the printer.
Administrator Password Sets the password using up to 10 alphanumeric characters.
Re-enter Administrator
Password
Confirms the set password.
Access denial by the
authentication failure of
the Administrator
Sets the amount of time the administrator should wait for
the access to the printer setup from Dell Printer
Configuration Web Tool. Sets the time period from 5 up
to 255 seconds. The access is denied if the time-out time is
exceeded. If you set 0, this mode is disabled.