Color Printer User Manual
Table Of Contents
- Dell™ 2150cn/2150cdn Color Printer
- User's Guide
- Before Beginning
- Setting up the Printer (Printer Setup)
- Preparing Printer Hardware
- Installing Optional Accessories
- Connecting Your Printer
- Setting the IP Address
- Loading Paper
- Installing Printer Drivers on the Windows Computers
- Installing Printer Drivers on the Macintosh Computers
- Installing Printer Drivers on the Linux Computers (CUPS)
- Using Your Printer
- Dell Printer Configuration Web Tool
- Print Media Guidelines
- Loading Print Media
- Operator Panel
- Printing
- Know Your Printer
- Understanding the Tool Box Menus
- Understanding the Printer Menus
- Understanding Your Printer Software
- Understanding Fonts
- Understanding Printer Messages
- Printing With Web Services on Devices (WSD)
- Specifications
- Maintaining Your Printer
- Maintaining Your Printer
- Removing Options
- Clearing Jams
- Troubleshooting
- Troubleshooting Guide
- Basic Printer Problems
- Display Problems
- Printing Problems
- Print Quality Problems
- The output is too light
- Toner smears or print comes off
- Random spots/Blurred images
- The entire output is blank
- Streaks appear on the output
- Part or the entire output is black
- Pitched color dots
- Vertical blanks
- Ghosting
- Light-induced fatigue
- Fog
- Bead-Carry-Out (BCO)
- Jagged characters
- Banding
- Auger mark
- Wrinkled/Stained paper
- Damage on the leading edge of paper
- Jam/Alignment Problems
- The top and side margins are incorrect
- Color registration is out of alignment
- Images are skewed
- Standard 250-Sheet Tray Misfeed Jam
- SSF Misfeed Jam
- Optional 250-Sheet Feeder Misfeed Jam
- Regi Jam (Exit Sensor On JAM)
- Exit Jam (Exit Sensor Off JAM)
- Standard 250-Sheet Tray/Optional 250-Sheet Feeder Multi-feed Jam
- SSF Multi-feed Jam
- Noise
- Problems With Installed Optional Accessories
- Other Problems
- Contacting Service
- Troubleshooting Guide
- Appendix
- Index
158 Dell Printer Configuration Web Tool
Printer Settings
Use the Printer Settings menu to display the Printer Settings Report, Printer
Settings, and Printer Maintenance tabs and to configure the printer settings.
The following tabbed pages are displayed at the top of the right frame.
Printer Settings Report
The Printer Settings Report tab includes the Menu Settings and Reports
pages.
Menu Settings
Purpose:
To display the current settings of the operator panel menus.
Values:
System Settings Power Saver
Time - Sleep
Displays the time taken by the printer to enter
Sleep mode after it finishes a job.
Power Saver
Time - Deep
Sleep
Displays the time taken by the printer to enter
Deep Sleep mode after it has entered Sleep
mode.
Auto Reset Displays the amount of time before the printer
automatically resets the settings on the operator
panel to the defaults when no additional settings
are made.
Fault Time-Out Displays the amount of time the printer waits
before canceling a job that stops abnormally.
Job Time-Out Displays the amount of time the printer waits for
data to arrive from the computer.
Control Panel
Ton e
Displays the volume of the tone that is emitted
when the operator panel input is correct. Off
indicates that the tone is disabled.
Invalid Key Tone Displays the volume of the tone that is emitted
when the operator panel input is incorrect. Off
indicates that the tone is disabled.