Color Printer User Manual
Table Of Contents
- Dell™ 2150cn/2150cdn Color Printer
- User's Guide
- Before Beginning
- Setting up the Printer (Printer Setup)
- Preparing Printer Hardware
- Installing Optional Accessories
- Connecting Your Printer
- Setting the IP Address
- Loading Paper
- Installing Printer Drivers on the Windows Computers
- Installing Printer Drivers on the Macintosh Computers
- Installing Printer Drivers on the Linux Computers (CUPS)
- Using Your Printer
- Dell Printer Configuration Web Tool
- Print Media Guidelines
- Loading Print Media
- Operator Panel
- Printing
- Know Your Printer
- Understanding the Tool Box Menus
- Understanding the Printer Menus
- Understanding Your Printer Software
- Understanding Fonts
- Understanding Printer Messages
- Printing With Web Services on Devices (WSD)
- Specifications
- Maintaining Your Printer
- Maintaining Your Printer
- Removing Options
- Clearing Jams
- Troubleshooting
- Troubleshooting Guide
- Basic Printer Problems
- Display Problems
- Printing Problems
- Print Quality Problems
- The output is too light
- Toner smears or print comes off
- Random spots/Blurred images
- The entire output is blank
- Streaks appear on the output
- Part or the entire output is black
- Pitched color dots
- Vertical blanks
- Ghosting
- Light-induced fatigue
- Fog
- Bead-Carry-Out (BCO)
- Jagged characters
- Banding
- Auger mark
- Wrinkled/Stained paper
- Damage on the leading edge of paper
- Jam/Alignment Problems
- The top and side margins are incorrect
- Color registration is out of alignment
- Images are skewed
- Standard 250-Sheet Tray Misfeed Jam
- SSF Misfeed Jam
- Optional 250-Sheet Feeder Misfeed Jam
- Regi Jam (Exit Sensor On JAM)
- Exit Jam (Exit Sensor Off JAM)
- Standard 250-Sheet Tray/Optional 250-Sheet Feeder Multi-feed Jam
- SSF Multi-feed Jam
- Noise
- Problems With Installed Optional Accessories
- Other Problems
- Contacting Service
- Troubleshooting Guide
- Appendix
- Index
Understanding the Tool Box Menus 281
To print the internal environment sensor information of the printer to Result.
Val u e s:
Clean Developer
Purpose:
To rotate the developer motor and stir the toner in the toner cartridge.
Val u e s:
Refresh Mode
Purpose:
To use up a toner cartridge or PHD unit when you need to replace it before the
end of its life, or to stir the toner in a new toner cartridge.
NOTE: Using the Refresh Mode consumes extra toner.
Val u e s:
Resetting Defaults
After executing this function and rebooting the printer, all the menu parameters,
except the parameters for the network, are reset to their default values.
When Using the Tool Box
NOTE:
Get Environment
Sensor Info
Click this button to confirm the internal environment sensor
information of the printer such as temperature and humidity.
Clean Developer Click Start to stir the toner.
Toner Refresh
Mode
Yellow Click Yellow to clean the yellow cartridge.
Magenta Click Magenta to clean the magenta cartridge.
Cyan Click Cyan to clean the cyan cartridge.
Black Click Black to clean the black cartridge.
Drum Refresh
Mode
Drum Click Drum to clean the drum.