Color Printer User Manual
Table Of Contents
- Dell™ 2150cn/2150cdn Color Printer
- User's Guide
- Before Beginning
- Setting up the Printer (Printer Setup)
- Preparing Printer Hardware
- Installing Optional Accessories
- Connecting Your Printer
- Setting the IP Address
- Loading Paper
- Installing Printer Drivers on the Windows Computers
- Installing Printer Drivers on the Macintosh Computers
- Installing Printer Drivers on the Linux Computers (CUPS)
- Using Your Printer
- Dell Printer Configuration Web Tool
- Print Media Guidelines
- Loading Print Media
- Operator Panel
- Printing
- Know Your Printer
- Understanding the Tool Box Menus
- Understanding the Printer Menus
- Understanding Your Printer Software
- Understanding Fonts
- Understanding Printer Messages
- Printing With Web Services on Devices (WSD)
- Specifications
- Maintaining Your Printer
- Maintaining Your Printer
- Removing Options
- Clearing Jams
- Troubleshooting
- Troubleshooting Guide
- Basic Printer Problems
- Display Problems
- Printing Problems
- Print Quality Problems
- The output is too light
- Toner smears or print comes off
- Random spots/Blurred images
- The entire output is blank
- Streaks appear on the output
- Part or the entire output is black
- Pitched color dots
- Vertical blanks
- Ghosting
- Light-induced fatigue
- Fog
- Bead-Carry-Out (BCO)
- Jagged characters
- Banding
- Auger mark
- Wrinkled/Stained paper
- Damage on the leading edge of paper
- Jam/Alignment Problems
- The top and side margins are incorrect
- Color registration is out of alignment
- Images are skewed
- Standard 250-Sheet Tray Misfeed Jam
- SSF Misfeed Jam
- Optional 250-Sheet Feeder Misfeed Jam
- Regi Jam (Exit Sensor On JAM)
- Exit Jam (Exit Sensor Off JAM)
- Standard 250-Sheet Tray/Optional 250-Sheet Feeder Multi-feed Jam
- SSF Multi-feed Jam
- Noise
- Problems With Installed Optional Accessories
- Other Problems
- Contacting Service
- Troubleshooting Guide
- Appendix
- Index
Understanding the Printer Menus 327
6
Press button until
Enable
appears, and then press the
(Set)
button.
7
Enter the new password, and then press the
(Set)
button.
8
Re-enter the password to confirm the password that you entered, and then
press the
(Set)
button.
The password has been changed.
NOTE: If you forget your password, turn off the printer. Then, while holding
the
(Menu)
button
, turn on the printer. Perform steps 7 to 8 to reset the password.
NOTE: If you change the password while Panel Lock is Enable, follow the
following steps. Perform steps 1 to 4 above. Press
button until Change
Password appears, and then press the (Set) button. Perform steps 7 and 8
above to change the password. This will change the password
.
Disabling the Panel Lock
1
Press the
(Menu)
button.
2
Press button until
Admin Menu
appears, and then press the
(Set)
button.
3
Press button until
Secure Settings
appears, and then press the
(Set)
button.
4
Ensure that
Panel Lock
is displayed, and then press the
(Set)
button.
5
Ensure that
Panel Lock Set
is displayed, and then press the
(Set)
button.
6
Ensure that
Disable
is displayed, and then press the
(Set)
button.
7
Enter the current password, and then press the
(Set)
button.
The setting has been changed.
Resetting Defaults
After executing this function and rebooting the printer, all the menu parameters,
except the parameters for the network, are reset to their default values.
When Using the Operator Panel
1
Press the (
Menu)
button.
2
Press button until
Admin Menu
appears, and then press the
(Set)
button.