Printer User Manual

206 Dell Printer Configuration Web Tool
Line Type Sets the default line type; PSTN or PBX.
Tone/Pulse Sets whether to use tone or pulse dialing.
Resend Delay Sets the interval (3255 seconds) between re-send attempts.
Redial
Attempts
Sets the number of redial attempts (013) to make if the destination
fax number is busy. If you enter 0, the printer will not redial.
Redial Delay Sets the interval (115 minutes) between redial attempts.
Junk Fax Setup Sets whether to reject unwanted faxes by accepting only the faxes
from the numbers registered in the Phone Book
Remote Receive Sets whether to receive a fax by pressing a remote receive code on the
external telephone.
Remote Receive
Tone
Sets a 2-digit remote receive code when Remote Receive is On.
Fax Header Sets whether to print the information of the sender on the header of
faxes.
Fax Header
Name
Allows you to enter a name that will be printed on the header of faxes.
Fax Number Allows you to enter the fax number of the printer, which will be
printed on the header of faxes.
Fax Cover Page Sets whether to attach a cover page to faxes.
DRPD Pattern Sets the Distinctive Ring Pattern Detection (DRPD) setting from
Pattern1 to Pattern7.
DRPD is a service provided by some telephone companies.
Duplex Print
*1
Sets whether to print on both sides of a sheet of paper.
Sent Fax
Forward
Sets whether to forward incoming faxes to a specified destination.
Fax Forward
Number
Allows you to enter the fax number of the destination to which
incoming faxes will be forwarded.
Prefix Dial Sets whether to set a prefix dial number.
Prefix Dial
Number
Sets a prefix dial number of up to five digits. This number dials before
any auto dial number is started. It is useful for accessing the Private
Automatic Branch Exchange (PABX).