Owner manual

Type The type of routing. This can be either of the following:

LAN or WAN interface (INTF)

Static routing

Destination LAN IP

Address

Either an entire network or a specific IP address. An IP address ending in .0 refers to a

network.

Subnet Mask Must follow the IP subnet mask rules

Gateway IP Address To communicate with an IP address matching the destination IP Address, the Dell Wireless

2350 Broadband Router sends all traffic through the gateway IP address listed here.

Hop Count The number of routers the packet has passed through to its destination. Hop count is used to

measure the distance between a source and a destination. If there are 3 routers between the

source and the destination nodes, the hop count for the packet will be 3 when it arrives at its

destination node.

System Diagnostic