Service manual

Alignment and Troubleshooting
4-9
Service Manual
1. Open and close the front cover. The jammed
paper automatically exits the printer.
If the paper does not exit, go to the next step.
2. Pull the paper tray open.
3. Remove the paper by gently pulling it straight
out.
If you cannot see the paper or the paper does
not move when pulled, check the fuser area.
For more information, see “Fuser Area Jam”.
4. Insert the paper tray into the printer until it snaps
into place.
Printing automatically resumes.
Paper Feed Jam (tray 1)