User's Manual

Removing and Installing Devices While the Computer Is

Turned Off

Your computer ships with an optical drive installed in the module bay. However, the device screw is not

installed in the optical drive but packaged separately. When you install your device in the module bay, you can

install the device screw.

If the Device Screw Is Not Installed

1. Press the device latch release so that the latch release pops out.

1 status button on the

battery charge gauge

2 second battery (bottom)

CAUTION: Before performing any of the following procedures, read and follow the safety

instructions in the System Information Guide.

NOTE: If the device screw is not installed, you can remove and install devices while the computer is

running and connected to a docking device (docked).

NOTE: You do not need to install the device screw unless you want to secure the module inside the

computer for security purposes.

NOTICE: To prevent damage to devices, place them in a safe, dry place when they are not installed in

the computer. Avoid pressing down on them or placing heavy objects on top of them.

e 2 of 12Usin

the Module Ba

1/13/2004file://C:\Documents%20and%20Settin

s\msclark1\Local%20Settin

s\Tem

\~hhF0E2.htm