User's Manual

Ensure that your feet are resting flat on the floor.

When sitting, make sure the weight of your legs is on your feet and not on the front of your chair seat.

Adjust your chair's height or use a footrest, if necessary, to maintain proper posture.

Vary your work activities. Try to organize your work so that you do not have to type for extended

periods of time. When you stop typing, try to do things that use both hands.

For more information about ergonomic computing habits, see the BSR/HFES 100 standard, which can be

purchased on the Human Factors and Ergonomics Society (HFES) website at:

www.hfes.org/publications/HFES100.html

References:

1. American National Standards Institute. ANSI/HFES 100: American National Standards for Human Factors

Engineering of Visual Display Terminal Workstations. Santa Monica, CA: Human Factors Society, Inc., 1988.

2. Human Factors and Ergonomics Society. BSR/HFES 100 Draft standard for trial use: Human Factors

Engineering of Computer Workstations. Santa Monica, CA: Human Factors and Ergonomics Society, 2002.

3. International Organization for Standardization (ISO). ISO 9241 Ergonomics requirements for office work

with visual display terminals (VDTs). Geneva, Switzerland: International Organization for Standardization,

1992.

Regulatory Notices

Electromagnetic Interference (EMI) is any signal or emission, radiated in free space or conducted along power

or signal leads, that endangers the functioning of a radio navigation or other safety service or seriously

degrades, obstructs, or repeatedly interrupts a licensed radio communications service. Radio communications

services include but are not limited to AM/FM commercial broadcast, television, cellular services, radar, air-

traffic control, pager, and Personal Communication Services (PCS). These licensed services, along with

unintentional radiators such as digital devices, including computers, contribute to the electromagnetic

environment.

Electromagnetic Compatibility (EMC) is the ability of items of electronic equipment to function properly

together in the electronic environment. While this computer has been designed and determined to be

compliant with regulatory agency limits for EMI, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause interference with radio communications services, which

can be determined by turning the equipment off and on, you are encouraged to try to correct the interference

by one or more of the following measures:

Reorient the receiving antenna.

Relocate the computer with respect to the receiver.

Move the computer away from the receiver.

Plug the computer into a different outlet so that the computer and the receiver are on different branch

circuits.

If necessary, consult a Dell Technical Support representative or an experienced radio/television technician for

additional suggestions.

Dell™ computers are designed, tested, and classified for their intended electromagnetic environment. These

electromagnetic environment classifications generally refer to the following harmonized definitions:

e 2 of 13A

endix

1/13/2004file://C:\Documents%20and%20Settin

s\msclark1\Local%20Settin

s\Tem

\~hh1EA0.htm