User's Manual

setting to Fast IR or Slow IR.

It is recommended that you use Fast IR. If the infrared device cannot communicate with your

computer, turn off the computer and repeat steps 1 through 5 to change the setting to Slow IR.

6. Press <Esc> to save the changes and exit the system setup program.

If you are prompted to restart your computer, click Yes.

7. Follow the instructions on the screen while the infrared sensor driver is being installed.

8. At the end of the installation process, click Yes to restart the computer.

After you enable the infrared sensor, you can use it to establish a link to an infrared device. To set up and use

an infrared device, see the infrared device documentation and Windows Help.

e 4 of 4Usin

the S

stem Setu

Pro

ram

1/13/2004file://C:\Documents%20and%20Settin

s\msclark1\Local%20Settin

s\Tem

\~hh4200.htm