User's Manual

6. Ensure that the display is open approximately 2.54 cm (1 inch).

7. Press the hard drive cover into the bay until it is fully seated in the bay.

8. Turn the computer over. Use a small screwdriver to tighten the screw.

9. Use the Operating System CD to install the operating system

for your computer.

10. Use the Drivers and Utilities CD to install the drivers and utilities

for your computer.

Connecting a Television to the Computer

Your computer has an S-video TV-out connector that enables you to connect the computer to a television.

Using a commercially available S-video cable or composite video cable, you can connect the computer to a

television in one of two ways:

S-video (for a television with S-video input)

Composite video (for a television with only a composite video input; also uses a composite TV-out

adapter cable)

The audio connector on the side of the computer enables you to connect the computer to your television or

audio device, using a commercially available audio cable.

When you complete the cable connection, see "Enabling the Display Settings for a Television

" to ensure that

the computer recognizes and works properly with the television.

S-Video Connection

NOTICE: You cannot replace your hard drive unless you open your display first.

NOTICE: Use firm and even pressure to slide the drive into place. If you force the hard drive into place

using excessive force, you may damage the hard drive connector.

NOTE: Diagrams for each connection combination appear at the beginning of each subsection to help

you determine which method you should use.

e 12 of 17Addin

and Re

lacin

Parts

1/13/2004file://C:\Documents%20and%20Settin

s\msclark1\Local%20Settin

s\Tem

\~hh93B0.htm