User's Manual

the access point, if a higher priority profile becomes available, no switching will

occur.

● The Configuration Service is only available if Intel(R) PROSet for Wireless is

installed.

● If a connection to an access point cannot be made using any of the profiles in the

Profile List, a dialog will display the available networks.

● If there are multiple profiles listed for an available network, a dialog box will list the

profiles for you to choose from.

● If an available network is detected with WEP encryption and authentication, a

dialog for setting up WEP encryption displays before the connection is made.

The Configuration Service can be used in two ways:

1. Connect to available network using profiles only: In this mode the Configuration

Service attempts to connect to a network access point using profiles from the

Profile List only. If no matching profile is found, a dialog appears that lists the

available networks. You can also close this dialog without connecting by clicking

the Cancel button. The adapter will remain unassociated, and the list of available

networks will NOT be displayed again unless another available network is

detected. This mode is set in the Advanced Setting options.

2. Connect to any available network if no matching profile found: In this mode the

Configuration Service attempts to connect to a network access point first using

profiles from the Profile List. If no matching profile is found, the Configuration

Service automatically connects to any available network. This mode is set in the

Advanced Setting options.

Enabling Automatic Connection

The Configuration Service also monitors for the "resume status" after a laptop computer

suspend event. When this occurs, the Configuration Service will re-enable the automatic

connection service.

These features can be enabled again after rebooting your computer or after a suspend

and resume cycle.

Features affected when another profile management application is detected

For AAA Client:

Select OK, and the AAA Client application will manage the adapter. The current