Users Guide
Table Of Contents
- Safety instructions
- About your monitor
- Setting up the monitor
- Operating the monitor
- Turning on the monitor
- Using the joystick control
- Using the rear-panel controls
- Using the On-Screen Display (OSD) menu
- Locking the rear-panel control buttons
- Setting the maximum resolution
- Setting the maximum frame rate
- Using the tilt and vertical extension
- Adjusting the rotation display settings of your system
- Troubleshooting
- Appendix
34 │ Setting up the monitor
Removing the monitor stand
NOTE: To prevent scratches on the LCD screen when removing the
stand, ensure that the monitor is placed on a soft, clean surface.
NOTE: The following steps are specifically for removing the stand that
is shipped with your monitor. If you are removing a stand that you
purchased from any other source, follow the setup instructions that
were included with the stand.
To remove the stand:
1. Pl
ace the monitor on a soft cloth or cushion.
2. Pr
ess and hold the stand release button.
3. L
ift the stand up and away from the monitor.