Users Guide
Table Of Contents
- Safety instructions
- About your monitor
- Setting up the monitor
- Operating the monitor
- Turning on the monitor
- Using the joystick control
- Using the rear-panel controls
- Using the On-Screen Display (OSD) menu
- Locking the rear-panel control buttons
- Setting the maximum resolution
- Setting the maximum frame rate
- Using the tilt and vertical extension
- Adjusting the rotation display settings of your system
- Troubleshooting
- Appendix
Operating the monitor │ 43
Input Source Selects between the different video signals that may
be connected to your monitor.
DP Select the DP input when you are using the
DisplayPort (DP) connector. Press the joystick
button to confirm the selection.
HDMI 1 Select the H
DMI 1 or HDMI 2 input when you are
using the HDMI connector. Press the joystick button
to confirm the selection.
HDMI 2
Auto Select Automatically scans for available input sources. Press
the
joystick button to confirm the selection.
Reset Input
Sour
ce
Resets all settings under the Input Source menu to
the factory defaul ts.