Users Guide
Table Of Contents
- Safety instructions
- About your monitor
- Setting up the monitor
- Operating the monitor
- Turning on the monitor
- Using the joystick control
- Using the rear-panel controls
- Using the On-Screen Display (OSD) menu
- Locking the rear-panel control buttons
- Setting the maximum resolution
- Setting the maximum frame rate
- Using the tilt and vertical extension
- Adjusting the rotation display settings of your system
- Troubleshooting
- Appendix
54 │ Operating the monitor
4. Click the Display adapter properties link.
5. Click the Monitor tab.
6. C
lick the dropdown list of Screen refresh rate and select 240 Hertz.
7. Cl
ick OK.
If you do not see 1920 x 1080 as an option, you may need to update your graphics
driver. D
epending on your computer, complete one of the following procedures:
If you have a Dell desktop or portable computer:
•Go to https://www.dell.com/support, enter your service tag, and download
the latest driver for your graphics card.
If you are using a non-Dell computer (portable or desktop):
• Go to the support site for your computer and download the latest graphic
driv
ers.
• Go to your graphics card website and download the latest graphic drivers.
Using the tilt and vertical extension
NOTE: The following instructions are applicable only for attaching the
stand that was shipped with your monitor. If you are attaching a stand
that you purchased from any other source, follow the setup
instructions that are included with the stand.
Tilt and swivel extensions
With the stand attached to the monitor, you can tilt
and swivel the monitor for the
most comfortable viewing angle.
NOTE: The stand is not factory-installed.