Dell Gaming Monitor - S2522HG Benutzerhandbuch Modell: S2522HG Behördliche Modellnummer: S2522HGb
HINWEIS: Ein HINWEIS weist auf wichtige Informationen hin, die Ihnen helfen, Ihren Computer besser zu nutzen. VORSICHT: Eine VORSICHT weist auf mögliche Schäden an der Hardware oder Datenverluste hin, wenn die Anweisungen nicht befolgt werden. ACHTUNG: Eine ACHTUNG beschreibt die Möglichkeit von Eigentumsschäden, Verletzungen oder Tod. Copyright © 2021 Dell Inc. oder deren Tochtergesellschaften. Alle Rechte vorbehalten. Dell, EMC und andere Warenzeichen sind Warenzeichen der Dell Inc.
Inhalt Sicherheitshinweise . . . . . . . . . . . . . . . . . . . . . . . . . 6 Über Ihren Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Lieferumfang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Produktmerkmale. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Komponenten und Bedienelemente . . . . . . . . . . . . . . . . . 10 Vorderseite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Seitenansicht . . . . . .
Hinweise zur Wartung . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Monitor reinigen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Monitor einrichten . . . . . . . . . . . . . . . . . . . . . . . . . 29 Ständer einrichten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Monitor anschließen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 DisplayPort Kabel (DP-zu-DP) und das Netzkabel anschließen . .
Entgegen dem Uhrzeigersinn drehen . . . . . . . . . . . . . . . . . . . . . . 60 Anzeigerotation-Einstellungen Ihres Systems anpassen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Problemlösung . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Selbsttest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selbstdiagnose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Allgemeine Probleme . . . . . . . . . . . . . . . . . . . . . .
Sicherheitshinweise VORSICHT: Die Verwendung von anderen als in dieser Dokumentation angegebenen Bedienelementen, Anpassungen oder Verfahren kann zu Schock-, elektrischen und/oder mechanischen Gefahren führen. • Stellen Sie den Monitor auf eine feste Oberfläche und behandeln Sie ihn vorsichtig. Der Bildschirm ist zerbrechlich und kann beschädigt werden, wenn er fallen gelassen oder hart getroffen wird.
Über Ihren Monitor Lieferumfang Der Monitor wird mit den in der unteren Tabelle gezeigten Artikeln geliefert. Falls ein Artikel fehlt, wenden Sie sich an Dell. Weitere Informationen finden Sie unter Kontakt zu Dell. HINWEIS: Einige Artikel könnten optional sein und nicht mit dem Monitor geliefert werden. Einige Funktionen könnten in einigen Ländern nicht verfügbar sein.
Netzkabel (Je nach Land verschieden) DisplayPort auf DisplayPort 1.2 Kabel HDMI 2.0-Kabel SuperSpeed USB 5 Gbps (USB 3.2 Gen1) UpstreamKabel (aktiviert die USB-Ports am Monitor) • Kurzanleitung • Sicherheit, Umweltschutz und Bestimmungen Produktmerkmale Der Dell S2522HG Monitor arbeitet mit Active Matrix-, Dünnschichttransistor(TFT) und Flüssigkristall-Technologien (LCD) und einer LED-Beleuchtung. Die Monitorfunktionen umfassen: • 62,20 cm (24,50 Zoll) sichtbarer Bereich (diagonal gemessen).
• Unterstützt eine hohe Aktualisierungsrate von 240 Hz und eine schnelle Reaktionszeit von 1 ms Grau-zu-Grau im Extrem Modus* • Farbbereich von 99% sRGB • Einstellmöglichkeiten für Kippen, Schwenken, Drehung und Höhenanpassung • Digitale Konnektivität mit DisplayPort und HDMI • Ausgestattet mit 1 SuperSpeed USB 5 Gbps (USB 3.2 Gen1) Type-B Upstream-Port, 1 SuperSpeed USB 5 Gbps (USB 3.2 Gen1) Type-A Downstream-Ladeanschluss, und 3 SuperSpeed USB 5 Gbps (USB 3.2 Gen1) Type-A Downstream-Ports.
Komponenten und Bedienelemente Vorderseite Etikett Beschreibung 1 Ein/Aus-Taste (mit LED-Anzeige) Zum Ein-/Ausschalten des Monitors. Strahler Wenn die Einrichtung des Monitors abgeschlossen ist, tippen Sie auf den Berührungssensor unten auf dem Display, um die Strahler ein- oder auszuschalten (siehe Strahler und Downlight). 2 Seitenansicht 10 │ Über Ihren Monitor Verwenden Ein leuchtendes weißes Licht zeigt an, dass der Monitor eingeschaltet ist und normal funktioniert.
Rückseite Ansicht von hinten ohne Monitor-Standfuß Etikett Beschreibung Rückansicht mit Monitorständer Verwenden 1 Joystick Zur Steuerung des OSD-Menüs. 2 Funktionstasten Weitere Informationen finden Sie unter Monitor bedienen. 3 VESA-Montagebohrungen (100 mm x 100 mm- Hinter der angebrachten VESAAbdeckung) Befestigen Sie den Monitor per VESAkompatibler Wandmontagehalterung (100 mm x 100 mm) an einer Wand. 4 Etikett mit behördlichen Bestimmungen Liste der behördlichen Zulassungen.
Ansicht von unten Ansicht von unten ohne Monitor-Standfuß Etikett Beschreibung Verwenden 1 Netzkabelanschluss Schließen Sie das Netzkabel an (im Lieferumfang des Monitors enthalten). 2 Schlitz für Sicherheitsschloss Sichern Sie den Monitor mit einem Schloss (nicht im Lieferumfang enthalten). 3 HDMI Port (HDMI 1) Verbinden Sie Ihren Computer mit dem HDMIKabel (im Lieferumfang des Monitors enthalten).
8 SuperSpeed USB 5 Gbps (USB 3.2 Gen1) Type-A Downstream-Port (3) Hier schließen Sie Ihre USB 3.2 Gen1 (5 Gbps) Geräte an.* HINWEIS: Um diese Anschlüsse zu verwenden, müssen Sie das USB-Kabel (im Lieferumfang des Monitors enthalten) mit dem USB-Upstream-Anschluss des Monitors und Ihrem Computer verbinden. 9 Strahler Wenn die Einrichtung des Monitors abgeschlossen ist, tippen Sie auf den Berührungssensor unten auf dem Display, um die Strahler ein- oder auszuschalten.
*Um Signalstörungen zu vermeiden wenn ein drahtloses USB-Gerät an einen USBDownstream-Anschluss angeschlossen wurde, wird nicht empfohlen, andere USBGeräte an den nebenstehenden Anschluss anzuschließen.
Ansprechzeit 1 ms Grau-zu-Grau im Extrem Modus* 2 ms Grau-zu-Grau im Superschnell Modus 4 ms Grau-zu-Grau im Schnell Modus *1 ms ist im Extrem Modus erreichbar, um sichtbare Bewegungsunschärfe und erhöhte Bildempfindlichkeit zu reduzieren. Dies kann jedoch einige leichte und auffällige visuelle Artefakte in das Bild einbringen.
Angaben zur Auflösung Modell S2522HG Horizontalfrequenzen 30 kHz bis 255 kHz (automatisch) Vertikalfrequenzen 48 Hz bis 240 Hz (automatisch) Max.
1920 x 1080 137,30 120,00 285,50 +/- 1920 x 1080 166,60 144,00 346,50 +/- 1920 x 1080 278,40 240,00 567,40 +/- Elektrische Daten Modell S2522HG Videoeingangssignale HDMI 2.0/DisplayPort 1.2, 600 mV für jede differentielle Linie, 100 Ω Eingangsimpedanz pro Differentialpaar Netzeingangsspannung / 100 VAC bis 240 VAC / 50 Hz oder 60 Hz ± 3 Hz / Frequenz / Strom 1,50 A (typisch) Einschaltstrom • 120 V: 30 A (Max.) bei 0°C (Kaltstart) • 240 V: 60 A (Max.
Physische Eigenschaften Modell S2522HG Signalkabeltyp • Digital: DisplayPort, 20-polig • Digital: HDMI, 19-polig • Universal Serial Bus: USB, 9-polig HINWEIS: Dell Monitore sind so konzipiert, dass sie optimal mit den Videokabeln zusammenarbeiten, die mit Ihrem Monitor mitgeliefert werden.
Gewicht Gewicht mit Verpackung 8,54 kg (18,82 lb) Gewicht mit montiertem Ständer und Kabeln 6,13 kg (13,51 lb) Gewicht ohne montierten Ständer (zur Wand- oder VESA-Befestigung - ohne Kabel) 3,72 kg (8,20 lb) Gewicht des Ständers 5,72 kg (12,61 lb) Umgebungsbedingungen Modell S2522HG Kompatible Standards • RoHS-konform • Mit Ausnahme der externen Kabel sind keine bromierten Flammschutzmittel (BFR) und kein Polyvinylchlorid (PVC) (enthält keine Halogene) enthalten • Bildschirm aus arsenfreiem Glas u
Pinbelegung DisplayPort-Anschluss Pin Nummer Seite mit 20 Stiften des angeschlossenen Signalkabels 1 ML3 (n) 2 GND 3 ML3 (p) 4 ML2 (n) 5 GND 6 ML2 (p) 7 ML1 (n) 8 GND 9 ML1 (p) 10 ML0 (n) 11 GND 12 ML0 (p) 13 GND 14 GND 15 AUX (p) 16 GND 17 AUX (n) 18 Hot-Plug-Erkennung 19 Re-PWR 20 +3,3 V DP_PWR 20 │ Über Ihren Monitor
HDMI-Anschluss Pin Nummer Seite mit 19 Stiften des angeschlossenen Signalkabels 1 TMDS DATA 2+ 2 TMDS DATA 2, Abschirmung 3 TMDS DATA 2- 4 TMDS DATA 1+ 5 TMDS DATA 1, Abschirmung 6 TMDS DATA 1- 7 TMDS DATA 0+ 8 TMDS DATA 0, Abschirmung 9 TMDS DATA 0- 10 TMDS CLOCK+ 11 TMDS CLOCK, Abschirmung 12 TMDS CLOCK- 13 CEC 14 Reserviert (am Gerät nicht angeschlossen) 15 DDC CLOCK (SCL) 16 DDC DATA (SDA) 17 DDC/CEC-Masse 18 +5 V-Stromversorgung 19 HOT-PLUG-ERKENNUNG Über Ihren
Plug & Play Unterstützung Sie können den Monitor mit jedem Plug-and-Play-kompatiblen System verbinden. Der Monitor stellt dem Computersystem automatisch eigene EDID-Daten (Extended Display Identification Data) über DDC-Protokolle (Display Data Channel) zur Verfügung, so dass sich das System selbst konfigurieren und die Monitoreinstellungen optimieren kann. Die meisten Monitor-Installationen laufen automatisch ab; auf Wunsch können Sie unterschiedliche Einstellungen wählen.
5 SSTX- 6 SSTX+ 7 GND 8 SSRX- 9 SSRX+ USB 3.2 Gen1 (5 Gbps) Downstream Anschluss Pin Nummer 9-poliger Verbinder 1 VCC 2 D- 3 D+ 4 GND 5 SSRX- 6 SSRX+ 7 GND 8 SSTX- 9 SSTX+ USB-Ports • 1 x Upstream - hinten • 2 x Downstream - hinten • 2 x Downstream - unten Ladeanschluss - der Anschluss mit dem Symbol unterstützt bis zu 2 A Schnellladung, wenn das Gerät BC1.2-kompatibel ist. HINWEIS: Für die SuperSpeed USB 5 Gbps (USB 3.
HINWEIS: Die USB-Anschlüsse am Monitor funktionieren nur, wenn der Monitor eingeschaltet oder im Standbymodus ist. Wenn Sie den Monitor aus- und wieder einschalten, kann es ein paar Minuten dauern, bis angeschlossene Peripheriegeräte wieder normal funktionieren. LCD-Monitorqualität und Hinweise zu Pixeln Bei der Herstellung von LCD-Monitoren ist es keine Seltenheit, dass einzelne Bildpunkte (Pixel) nicht oder dauerhaft leuchten.
• Achten Sie darauf, dass sich der Bildschirm auf Augenhöhe oder etwas niedriger befindet, wenn Sie vor dem Monitor sitzen. • Stellen Sie die Neigung des Monitors, seinen Kontrast und die Helligkeitseinstellungen ein. • Stellen Sie die Umgebungsbeleuchtung um Sie herum ein (z. B. Deckenleuchten, Schreibtischlampen und die Vorhänge oder Jalousien an nahegelegenen Fenstern), um Reflexionen und Blendung auf dem Monitorbildschirm zu minimieren. • Verwenden Sie einen Stuhl, der den unteren Rücken gut stützt.
Monitor auf oder unter Augenhöhe Monitor und Tastatur direkt vor dem Benutzer positioniert Handgelenke entspannt und flach Füße flach auf dem Boden Handhabung und Bewegung Ihres Monitors Um sicherzustellen, dass der Monitor beim Anheben oder Bewegen sicher gehandhabt wird, befolgen Sie die unten genannten Richtlinien: • Schalten Sie Ihren Computer und den Monitor aus, bevor Sie den Monitor bewegen oder anheben. • Trennen Sie alle Kabel vom Monitor.
• Achten Sie beim Anheben oder Verschieben des Monitors darauf, dass der Bildschirm von Ihnen weg zeigt und nicht auf den Anzeigebereich drückt, um Kratzer oder Beschädigungen zu vermeiden. • Vermeiden Sie beim Transport des Monitors plötzliche Stöße oder Vibrationen. • Wenn Sie den Monitor anheben oder bewegen, drehen Sie ihn nicht auf den Kopf, während Sie den Sockel oder den Ständer festhalten. Dies könnte zu einer versehentlichen Beschädigung des Monitors oder zu Verletzungen führen.
Hinweise zur Wartung Monitor reinigen VORSICHT: Lesen und befolgen Sie die Sicherheitshinweise, bevor Sie den Monitor reinigen. ACHTUNG: Trennen Sie das Monitornetzkabel von der Stromversorgung, bevor Sie den Monitor reinigen. Beim Auspacken, Reinigen und beim allgemeinen Umgang mit dem Monitor halten Sie sich am besten an die nachstehenden Hinweise: • Befeuchten Sie zur Reinigung Ihres antistatischen Monitors ein weiches, sauberes Tuch leicht mit Wasser.
Monitor einrichten Ständer einrichten HINWEIS: Der Ständer wird im Werk nicht montiert. HINWEIS: Die folgenden Schritte beziehen sich speziell auf die Einrichtung des Ständers, der mit Ihrem Monitor geliefert wird. Wenn Sie einen Ständer anbringen, den Sie von einer anderen Quelle gekauft haben, folgen Sie den Anweisungen, die mit dem Ständer geliefert wurden. Ständer einrichten: 1.
6. Öffnen Sie die Schutzabdeckung am Monitor, um auf den VESA-Steckplatz am Monitor zuzugreifen. HINWEIS: Stellen Sie vor dem Anbringen des Ständers am Monitor sicher, dass die Frontplattenklappe geöffnet ist, um Platz für die Montage zu schaffen. 7. Führen Sie die Laschen am Ständer in die Schlitze an der hinteren Abdeckung des Monitors ein und senken Sie den Ständer ab, um ihn einrasten zu lassen.
8. Halten Sie den Ständer fest und heben Sie den Monitor vorsichtig an, und legen Sie ihn dann auf eine ebene Fläche. HINWEIS: Halten Sie den Ständer beim Anheben des Monitors fest, um unbeabsichtigte Beschädigungen zu vermeiden. 9. Heben Sie die Schutzabdeckung vom Monitor.
Monitor anschließen ACHTUNG: Bevor Sie die in diesem Abschnitt beschriebenen Schritte ausführen, lesen und befolgen Sie bitte die Sicherheitshinweise. HINWEIS: Dell Monitore sind so konzipiert, dass sie optimal mit den von Dell gelieferten Kabeln zusammenarbeiten. Dell übernimmt keine Garantie für die Videoqualität und die Leistung bei Verwendung von Kabeln anderer Hersteller als von Dell. HINWEIS: Führen Sie die Kabel durch die Kabelführungsöffnung, bevor Sie sie anschließen.
HDMI Kabel und das Netzkabel anschließen SuperSpeed USB 5Gbps (USB 3.2 Gen1) Kabel und das Netzkabel anschließen Nachdem Sie DisplayPort/HDMI Kabel angeschlossen haben, führen Sie zum Abschluss der Monitoreinrichtung bitte die nachstehenden Schritte zum Anschluss des USB-Kabels an den Computer aus: 1. Verbinden Sie den USB 3.2 Gen1 Upstream-Port (Kabel enthalten) mit dem passenden USB 3.2 Gen1 Port an Ihrem Computer (siehe Ansicht von unten für weitere Einzelheiten.). 2. Schließen Sie USB 3.
Ihre Kabel verlegen Nachdem Sie sämtliche erforderlichen Kabelverbindungen an Monitor und Computer hergestellt haben (siehe Monitor anschließen), führen Sie die Kabel wie oben gezeigt ordentlich durch den Kabelschacht. Ihren Monitor mit Kensington Schloss (optional) sichern Der Schlitz für das Sicherheitsschloss befindet sich an der Unterseite des Monitors (siehe Schlitz für Sicherheitsschloss).
Entfernen des Monitorständers HINWEIS: Damit der LCD Bildschirm beim Abnehmen des Ständers nicht verkratzt wird, achten Sie darauf, dass der Monitor auf einen sauberen Untergrund gelegt wird. HINWEIS: Die folgenden Schritte beziehen sich auf das Entfernen des Ständers, der mit Ihrem Monitor geliefert wird. Wenn Sie einen Ständer entfernen, den Sie von einer anderen Quelle gekauft haben, folgen Sie den Anweisungen, die mit dem Ständer geliefert wurden. So nehmen Sie den Ständer ab: 1.
VESA Wandmontageset (optional) (Schraubenabmessung: M4 x 10 mm). Lesen Sie die mit der VESA-kompatiblen Montageausrüstung für die Wand gelieferte Anleitung. 1. Legen Sie den Monitor auf ein weiches Tuch oder Kissen auf einem stabilen, ebenen Arbeitstisch. 2. Entfernen Sie den Monitorständer (siehe Entfernen des Monitorständers). 3. Die vier Schrauben, mit denen die Plastikabdeckung befestigt wird, mit einem Kreuzschlitzschraubenzieher entfernen. 4.
Monitor bedienen Schalten Sie den Monitor ein. Drücken Sie auf die Ein/Aus-Taste, um den Monitor einzuschalten. Verwendung der Joystick Steuerung Verwenden Sie die Joystick Steuerung an der Rückseite des Monitors, um OSDEinstellungen vorzunehmen. 1. Drücken Sie die Joystick Taste, um das OSD-Hauptmenü zu starten. 2. Bewegen Sie den Joystick nach oben/unten/links/rechts, um zwischen den Optionen zu wechseln. 3. Drücken Sie die Joystick Taste erneut, um die Einstellungen zu bestätigen und zu beenden.
Joystick Beschreibung • Wenn das OSD-Menü eingeschaltet ist, drücken Sie die Taste, um die Auswahl zu bestätigen oder die Einstellungen zu speichern. • Wenn das OSD-Menü ausgeschaltet ist, drücken Sie die Taste, um das OSD-Hauptmenü zu starten. Siehe Zugriff auf das Menüsystem. • Für die 2-Wege-Navigation (rechts und links). • Nach rechts bewegen, um in das Untermenü zu gelangen. • Nach links bewegen, um das Untermenü zu verlassen.
2 Zum Beenden des OSD-Hauptmenüs. Beenden Zur Auswahl eines gewünschten Farbmodus aus einer Voreinstellliste. 3 Schnellzugriffstasten/ Voreingestellte Modi Zur Ausführung des Dunkel Stabilisierung Menüs. 4 Schnellzugriffstasten/ Dunkel Stabilisierung 5 Zum direkten Zugriff auf die Helligkeit/ Kontrast Anpassungsregler.
Anwendung der Anzeige auf dem Bildschirm (OSD-Menü) Zugriff auf das Menüsystem Symbol Menü und Untermenüs Spiel Beschreibung Verwenden Sie dieses Menü, um Ihr visuelles Gameplay Erlebnis zu personalisieren. Voreingestellte Ermöglicht Ihnen die Auswahl aus einer Liste Modi voreingestellter Farbmodi. • Standard: Zum Laden der StandardFarbeinstellungen des Monitors. Dies ist der voreingestellte Standardmodus. • FPS: Lädt Farbeinstellungen, die ideal für Egoshooter (FPS) sind.
Voreingestellte • RPG: Lädt Farbeinstellungen, die ideal für die Modi meisten Rollenspiele (RPG) sind. • SPORTS: Lädt Farbeinstellungen, die ideal für Sportspiele sind. • Spiel 1/Spiel 2/Spiel 3: Ermöglicht Ihnen die Anpassung der Farbeinstellungen, Reaktionszeit und Dunkel Stabilisierung für Ihre Spielbedürfnisse. • ComfortView: Verringert den Anteil des vom Bildschirm abgegebenen blauen Lichts, um die Anzeige angenehmer für Ihre Augen zu machen.
Spiel verbessern Modus Die Option bietet drei verfügbare Funktion, um Ihr Gameplay Erlebnis zu verbessern. • Aus Wählen Sie Aus, um die Funktionen im Spiel verbessern Modus zu deaktivieren. • Timer Aktivieren oder deaktivieren Sie den Timer oben links auf dem Monitor. Der Timer zeigt die absolvierte Zeit seit dem Beginn des Spiels. Wählen Sie eine Option aus der Liste der Zeitintervalle, um sich über die verbleibende Zeit im Klaren zu sein.
Reaktionszeit Ermöglicht Ihnen die Einstellung der Reaktionszeit auf Schnell, Superschnell oder Extrem. Dunkel Verbessert die Sichtbarkeit in dunklen Spielszenarien. Stabilisierung Je höher der Wert (0 bis 3), desto besser ist das Anzeigebild in dunkler Umgebung sichtbar. Farbton Diese Funktion kann die Farbe des Videobildes in Richtung Grün bzw. Violett ändern. Mit dieser Funktion können Sie den Hautfarbton einstellen. Verwenden Sie den Joystick zur Einstellung des Farbtonpegels zwischen 0 und 100.
Sättigung Diese Funktion erlaubt Ihnen die Farbsättigung des Videobildes einzustellen. Verwenden Sie den Joystick zur Einstellung des Sättigungspegels zwischen 0 und 100. Bewegen Sie die Joystick nach oben, um das Videobild farbiger erscheinen zu lassen. Bewegen Sie die Joystick nach unten, um das Videobild eher einfarbig erscheinen zu lassen. HINWEIS: Die Sättigung Anpassung ist nur verfügbar, wenn Sie den FPS, MOBA/RTS, SPORTS oder RPG Voreinstellungsmodus auswählen.
Kontrast Zuerst die Helligkeit einstellen und danach nur dann den Kontrast einstellen, wenn weitere Einstellungen notwendig sind. Bewegen Sie den Joystick nach oben, um den Kontrast zu erhöhen, oder bewegen Sie den Joystick nach unten, um den Kontrast zu verringern (min. 0 / max. 100). Mit der Kontrast Funktion wird der Grad des Unterschiedes zwischen der Dunkelheit und der Helligkeit auf dem Monitorbildschirm eingestellt.
Display Mit dem Display Menü wird das Bild eingestellt. Längen-/ Stellen Sie das Seitenverhältnis auf 16:9, Seitenverhält- Automatische Skalierung, 4:3 oder 1:1. nis Eingangsfarb- Hier können Sie einen der folgenden format Videoeingabemodi wählen: • RGB: Wählen Sie diese Option, wenn Ihr Monitor an einen Computer oder einen Medien Player angeschlossen ist, der die RGB-Ausgabe unterstützt. • YCbCr: Wählen Sie diese Option, wenn Ihr Medien Player nur die YCbCr-Ausgabe unterstützt.
Audio Lautstärke Stellt die Lautstärke des Kopfhörerausgangs ein. Verwenden Sie den Joystick zur Einstellung der Lautstärke zwischen 0 und 100. Audio zurücks. Setzen Sie im Menü Audio sämtliche Einstellungen auf die Standardwerte zurück. Menü Diese Option auswählen, um die Einstellungen der OSD, wie z. B. Sprache der OSD, die Zeitdauer der Anzeige des Menüs auf dem Bildschirm usw., vorzunehmen.
Timer Legt fest, wie lange das OSD aktiv bleibt, nachdem Sie den Joystick bewegt oder eine Taste gedrückt haben. Bewegen Sie den Joystick zur Anpassung des Reglers in 1-Sekunden-Schritten im Bereich von 5 bis 60 Sekunden. Menü zurücks. Setzen Sie im Menü sämtliche Einstellungen auf die Standardwerte zurück.
USB Ermöglicht Ihnen die Aktivierung oder Deaktivierung der USB-Funktion während des Monitor Standbymodus. HINWEIS: USB EIN/AUS im Standbymodus ist nur verfügbar, wenn das USB Upstream-Kabel nicht angeschlossen ist. Diese Option wird ausgegraut, wenn das USB Upstream-Kabel angeschlossen wird. Downlight In der Werkseinstellung ist der Berührungssensor eingeschaltet, und Sie können die Strahler am unteren Rand des Displays antippen, um sie ein- oder auszuschalten.
Weiteres Wählen Sie diese Option zum Anpassen der OSDEinstellungen, z.B. DDC/CI, LCD-Konditionierung, usw. Info Anzeigen Zeigt die aktuellen Einstellungen des Monitors an. DDC/CI 50 │ Monitor bedienen DDC/CI (Display Data Channel/Command Interface) ermöglicht die Einstellbarkeit der Parametern Ihres Monitors (Helligkeit, Farbausgleich usw.) über die Software in Ihrem Computer. Diese Funktion kann durch Auswählen von Aus deaktiviert werden.
LCDZum Reduzieren von geringen Bildverzerrungen. Die Konditionierung Zeitdauer, die das Programm zum Durchführen benötigt, hängt vom Grad der Bildaufbewahrung ab. Diese Funktion kann durch Auswählen von Auf aktiviert werden. Firmware Zeigt die Firmwareversion des Monitors an. Servicemarkie- Zeigt die Servicemarkierung des Monitors an. Diese rung Zeichenfolge wird benötigt, wenn Sie nach telefonischem Support suchen, Ihren Garantiestatus überprüfen, Treiber auf der Webseite von Dell aktualisieren usw.
OSD-Warnmeldung Wenn der Monitor eine bestimmte Auflösung nicht unterstützt, wird die folgende Meldung angezeigt: Das bedeutet, dass sich der Monitor nicht richtig auf das Signal einstellen kann, das er vom Computer empfängt. In den Technische Daten des Monitors finden Sie die von Ihrem Monitor unterstützten Horizontal- und Vertikalfrequenzen. Der empfohlene Modus ist 1920 x 1080. HINWEIS: Die Meldung kann je nach angeschlossenem Eingangssignal leicht abweichen.
Wenn Sie die Standardeinstellungen für USB das erste Mal ändern, erscheint die folgende Meldung: HINWEIS: Wenn Sie Ja wählen, erscheint die Meldung beim nächsten Mal nicht, wenn Sie die USB Einstellungen ändern. Wenn Sie eine Werksrückstellung durchführen, wird die Meldung erneut angezeigt.
Das OSD kann nur im Normalbetriebsmodus funktionieren. Wenn Sie im Standbymodus eine andere Taste als die Ein/Aus-Taste drücken, erscheint je nach gewähltem Eingang die folgende Meldung: HINWEIS: Die Meldung kann je nach angeschlossenem Eingangssignal leicht abweichen. Wenn der HDMI oder DP-Eingang ausgewählt ist, aber das entsprechende Kabel nicht angeschlossen ist, wird das nachstehend gezeigte Dialogfeld eingeblendet. HINWEIS: Die Meldung kann je nach angeschlossenem Eingangssignal leicht abweichen.
Sperren der Kontrolltasten an der Rückseite des Geräts Sie können die Kontrolltasten an der Rückseite sperren, um den Zugriff auf das OSD-Menü und/oder die Ein-/Aus-Taste zu verhindern. Zum Sperren der Taste(n): 1. Halten Sie die Taste 5 vier Sekunden lang gedrückt, bis ein Menü auf dem Bildschirm erscheint. 2. Wählen Sie eine der folgenden Optionen: • Menü Tasten: Wählen Sie diese Option, um alle OSD Menütasten mit Ausnahme der Ein-/Austaste zu sperren.
Maximale Auflösung einstellen HINWEIS: Die Schritte können je nach Ihrer Windows Version leicht variieren. So stellen Sie die maximale Monitorauflösung ein: Unter Windows® 7, Windows® 8 und Windows® 8.1: 1. Wählen Sie unter Windows® 8 und Windows® 8.1 die Desktop Kachel zum Wechsel auf den klassischen Desktop. 2. Klicken Sie mit der rechten Maustaste auf den Desktop und klicken Sie auf Bildschirmauflösung. 3. Wenn Sie mehr als einen Monitor angeschlossen haben, wählen Sie unbedingt S2522HG. 4.
5. Klicken Sie auf die Registerkarte Monitor. 6. Klicken Sie auf die Dropdown-Liste Bildschirmaktualisierungsrate und wählen Sie 240 Hertz. 7. Klicken Sie auf OK. Unter Windows® 10: 1. Klicken Sie mit der rechten Maustaste auf den Desktop und klicken Sie auf Anzeigeeinstellungen. 2. Klicken Sie auf Erweiterte Anzeigeeinstellungen. 3. Wenn Sie mehr als einen Monitor angeschlossen haben, wählen Sie unbedingt S2522HG. 4. Klicken Sie auf den Link Adaptereigenschaften anzeigen. 5.
Neigungs- und Höhenverstellung HINWEIS: Die folgenden Anweisungen beziehen sich nur auf die Anbringung des Ständers, der mit Ihrem Monitor geliefert wurde. Wenn Sie einen Ständer anbringen, den Sie von einer anderen Quelle gekauft haben, folgen Sie den Anweisungen, die mit dem Ständer geliefert wurden. Kipp- und Schwenkeinstellung Ist der Ständer am Monitor befestigt, können Sie diesen neigen und drehen, um den bestmöglichen Ansichtswinkel einzustellen. HINWEIS: Der Ständer wird im Werk nicht montiert.
Die Anzeige drehen Bevor Sie die Anzeige drehen, stellen Sie sicher, dass sie vollständig vertikal ausgefahren und vollständig nach oben geneigt ist, damit sie nicht an den unteren Rand des Monitors stößt.
Entgegen dem Uhrzeigersinn drehen HINWEIS: Um die Anzeige-Rotierung-Funktion (Querformat/ Hochformat) mit Ihrem Dell-Computer nutzen zu können, benötigen Sie einen aktualisierten Grafikkartentreiber, der nicht mit dem Monitor geliefert wird. Zum Herunterladen des Grafikkartentreibers besuchen Sie www.dell.com/support und schauen im Download Bereich unter Videotreiber nach den neuesten Treiberaktualisierungen. HINWEIS: Im Hochformat Modus kann die Leistung von Grafikintensiven Anwendungen z.B.
Anzeigerotation-Einstellungen Ihres Systems anpassen Nachdem Sie Ihren Monitor gedreht haben, müssen Sie die AnzeigerotationEinstellungen Ihres Systems mit den folgenden Schritten anpassen. HINWEIS: Wenn Sie den Monitor nicht mit einem Dell-Computer verwenden, müssen Sie die Grafiktreiber-Webseite oder die Webseite Ihres Computerherstellers besuchen, um Informationen über das Ändern der Anzeigerotation-Einstellungen Betriebssystems zu erhalten. So stellen Sie die Anzeigerotation ein: 1.
Problemlösung ACHTUNG: Bevor Sie die in diesem Abschnitt beschriebenen Schritte ausführen, lesen und befolgen Sie bitte die Sicherheitshinweise. Selbsttest Ihr Monitor verfügt über eine Selbsttestfunktion, mit der Sie überprüfen können, ob der Monitor ordnungsgemäß funktioniert. Wenn Monitor und Computer ordnungsgemäß miteinander verbunden sind, der Monitorbildschirm jedoch leer bleibt, führen Sie bitte wie folgt den Monitor-Selbsttest aus: 1. Schalten Sie sowohl Computer als auch Monitor aus. 2.
Falls Ihr Monitorbildschirm nach den obigen Schritten immer noch leer bleibt, überprüfen Sie bitte Ihre Videokarte und den Computer; Ihr Monitor funktioniert einwandfrei. Selbstdiagnose Ihr Monitor ist mit einem integrierten Selbstdiagnose-Werkzeug ausgestattet, das Ihnen bei der Diagnose von Problemen mit dem Monitor oder mit Computer und Grafikkarte helfen kann. So starten Sie die Selbstdiagnose: 1. Überzeugen Sie sich davon, dass der Bildschirm sauber ist (kein Staub auf dem Bildschirm). 2.
Allgemeine Probleme In der folgenden Tabelle finden Sie grundlegende Informationen zu allgemeinen Monitorproblemen und zu möglichen Lösungen: Allgemeine Symptome Kein Bild/ BetriebsanzeigeLED leuchtet nicht Beschreibung Kein Bild Mögliche Lösungen • Achten Sie darauf, dass das Videosignalkabel richtig und fest an Monitor und Computer angeschlossen ist. • Überzeugen Sie sich davon, dass die Steckdose ausreichend Strom liefert, indem Sie einfach vorübergehend ein anderes Gerät anschließen.
Unscharfes Bild Bild ist unscharf, verschwommen oder weist Geistbilder auf • Verzichten Sie auf Videoverlängerungskabel. • Setzen Sie den Monitor auf die Werkseinstellungen zurück. • Die Bildauflösung auf das richtige Längen-/Breitenverhältnis ändern. Zittriges/ verwackeltes Videobild Unruhiges Bild oder leichte Bewegungen • Setzen Sie den Monitor auf die Werkseinstellungen zurück. • überprüfen Sie die Umgebungsbedingungen. • Bringen Sie den Monitor in einen anderen Raum und testen Sie ihn dort.
Geometrische Verzerrungen Bild ist nicht richtig zentriert Setzen Sie den Monitor auf die Werkseinstellungen zurück. Horizontale/ vertikale Linien Bild weist eine oder mehrere Linien auf • Setzen Sie den Monitor auf die Werkseinstellungen zurück. • Rufen Sie die Selbsttestfunktion auf (siehe Selbsttest) und prüfen Sie, ob die Linien auch im Selbsttestmodus gekennzeichnet sind. • Überprüfen Sie die Stecker am Videokabel auf verbogene oder abgebrochene Kontaktstifte. • Starten Sie die Selbstdiagnose.
Abschaltprobleme Monitor schaltet sich aus und wieder ein • Achten Sie darauf, dass das Videosignalkabel richtig und fest an Monitor und Computer angeschlossen ist. • Setzen Sie den Monitor auf die Werkseinstellungen zurück. • Rufen Sie die Selbsttestfunktion auf (siehe Selbsttest), um festzustellen, ob das Problem des Aus- und Einschaltens im Selbsttestmodus gekennzeichnet ist. Fehlende Farben Im Bild fehlen Farben • Führen Sie den Monitorselbsttest aus.
Nachbildeffekt (Eingebranntes Bild), verursacht durch längere Darstellung von Standbildern Ein schwaches Nachbild eines statischen Bildes erscheint auf dem Bildschirm • Stellen Sie den Bildschirm so ein, dass er sich nach einigen Minuten der Inaktivität ausschaltet. Dies kann in den Energieoptionen von Windows oder im Energiesparmodus von Mac eingestellt werden. • Alternativ können Sie einen Bildschirmschoner mit dynamisch wechselnden Bildinhalten nutzen.
Kein Bild; die LED Kein leuchtet weiß auf Eingangssignal, wenn Bedientasten gedrückt werden • Überprüfen Sie die Signalquelle. Vergewissern Sie sich, dass sich der Computer nicht im Energiesparmodus befindet. Dazu bewegen Sie die Maus oder drücken eine beliebige Taste an der Tastatur. • Überprüfen Sie, ob das Signalkabel richtig eingesteckt ist. Ziehen Sie nötigenfalls das Signalkabel und stecken Sie es wieder ein. • Setzen Sie den Computer oder das Videoabspielprogramm zurück.
SuperSpeed USB 5 Gbps (USB 3.2 Gen1) Schnittstelle ist langsam • Überprüfen Sie, ob Ihr Computer SuperSpeed SuperSpeed USB 5 Gbps (USB 3.2 Gen1)-kompatibel ist. USB 5 Gbps (USB 3.2 Gen1) • Manche Computer verfügen sowohl über Peripheriegeräte USB 3.2-, USB 2.0- als auch über USB 1.1sind zu langsam Ports. Überzeugen Sie sich davon, dass der oder richtige USB-Port genutzt wird. funktionieren • Trennen Sie das Upstream-Kabel zum überhaupt nicht Computer ab, schließen Sie es anschließend wieder an.
Anhang ACHTUNG: Sicherheitshinweise ACHTUNG: Die Verwendung von anderen als in dieser Dokumentation angegebenen Bedienelementen, Anpassungen oder Verfahren kann zu Schock-, elektrischen und/oder mechanischen Gefahren führen. Weitere Informationen über Sicherheitshinweise finden unter Sicherheit, Umweltschutz und Bestimmungen (SERI). FCC-Erklärung (nur für die USA) und weitere rechtliche Informationen Lesen Sie bitte die Webseite über rechtliche Konformität unter www.dell.