Users Guide
Table Of Contents
- Safety instructions
- About your monitor
- Setting up the monitor
- Operating the monitor
- Turning on the monitor
- Using the joystick control
- Using the rear-panel controls
- Using the On-Screen Display (OSD) menu
- Locking the rear-panel control buttons
- Setting the maximum resolution
- Setting the maximum frame rate
- Using the tilt and vertical extension
- Adjusting the rotation display settings of your system
- Troubleshooting
- Appendix
About your monitor │ 17
Electrical specifications
Video input signals HDMI 2.0/DisplayPort 1.2, 600 mV for each differential
l
ine, 100 Ω input impedance per differential pair
AC input voltage/
fr
equency/current
100 VAC to 240 VAC / 50 Hz or 60 Hz ± 3 Hz / 1.50 A
(typical)
Inrush current • 120 V: 30 A (Max.) at 0°C (cold start)
• 240 V: 60 A (Max.) at 0°C (cold start)
Power consumption •0.3 W (Off mode)
1
•0.3 W (Standby Mode)
1
•16.8 W (On mode)
1
•72 W (Max.)
2
•17.26 W (Pon)
3
•55.77 kWh (TEC)
3
1
As defined in EU 2019/2021 and EU 2019/2013.
2
Max. brightness and contrast setting with maximum power loading on all USB
ports.
3
Pon: Power consumption of On Mode measured with reference to Energy Star
test method.
TEC: Total energy consumption in kWh measured with reference to Energy Star
test method.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components and
peripherals you ordered and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making
decisions about electrical tolerances or otherwise. No warranty as to accuracy or
completeness is expressed or implied.
1920 x 1080 166.60 144.00 346.50 +/-
1920 x 1080 278.40 240.00 567.40 +/-
Mode
l S2522HG