Users Guide
Table Of Contents
- Safety instructions
- About your monitor
- Setting up the monitor
- Operating the monitor
- Turning on the monitor
- Using the joystick control
- Using the rear-panel controls
- Using the On-Screen Display (OSD) menu
- Locking the rear-panel control buttons
- Setting the maximum resolution
- Setting the maximum frame rate
- Using the tilt and vertical extension
- Adjusting the rotation display settings of your system
- Troubleshooting
- Appendix
Operating the monitor │ 47
Downlight The factory default setting of the touch sensor is on,
and you can tap the downlights at the bottom of the
display to turn them on or off. When the downlights
are on, they light up blue (see Downlights).
To turn off the touch sensor, select Of
f.
NOTE: On
monitors that are manufactured from
August 2021, the downlights can be turned on or off
only using the OSD menu.
Reset
Pe
rsonalization
Resets all settings under the Personalize menu to
the factory preset values.
Others Select this option to adjust the OSD settings, such as
DDC/CI, LCD Conditioning, and so on.
Display Info Displays the monitor's current settings.