Users Guide
Table Of Contents
- Safety instructions
- About your monitor
- Setting up the monitor
- Operating the monitor
- Turning on the monitor
- Using the joystick control
- Using the rear-panel controls
- Using the On-Screen Display (OSD) menu
- Locking the rear-panel control buttons
- Setting the maximum resolution
- Setting the maximum frame rate
- Using the tilt and vertical extension
- Adjusting the rotation display settings of your system
- Troubleshooting
- Appendix
48 │ Operating the monitor
DDC/CI DDC/CI (Display Data Channel/Command Interface)
allows your monitor parameters (brightness, color
balance, etc.) to be adjustable via the software on
your computer. You can disable this feature by
selecting Off. Enable this feature for best user
experience and optimum performance of your
monitor.
LCD
Conditioning
Helps reduce minor cases of image retention.
Depending on the degree of image retention, the
program may take some time to run. You can enable
this feature by selecting On.
Firmware Displays the firmware version of your monitor.
Service Tag Displays the service tag of your monitor. This string is
r
equired when you look for phone support, check
your warranty status, update drivers on Dell's
website, etc.
Reset Others Resets all settings under the Oth
ers menu to the
factory defaults.