Users Guide

Table Of Contents

Setting up the monitor | 25

Setting up the monitor

Connecting the stand

NOTE: The stand riser and stand base are detached when the monitor is

shipped from the factory.

NOTE: The following instructions are applicable only for the stand that

was shipped with your monitor. If you are connecting a stand that you

purchased from any other source, follow the set up instructions that

were included with the stand.

To attach the monitor stand:

1. Connect the stand base to the stand riser.

2. Open the screw handle on the stand base and tighten the screw to secure the

stand riser to the stand base.

3. Close the screw handle.