Users Guide

Operating the monitor | 47
OSD warning messages
When the monitor does not support a particular resolution mode, the following
message is displayed:
Dell 27 Gaming Monitor
S2722DGM
The current input timing is not supported by the monitor display. Please
change your input timing to
listed timing as per the monitor specifications.
2560x1440, 165Hz or any other monitor
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See Monitor specifications for the Horizontal and Vertical
frequency ranges addressable by this monitor. Recommended mode is 2560 x 1440.
Before the DDC/CI function is disabled, the following message is displayed:
The function of adjusting display setting using PC application will be
disabled.
Do you wish to disable DDC/CI function?
Yes No
S2722DGM
Dell 27 Gaming Monitor
When MPRT attempts to work but the frame rate is less that 120 Hz, the following
message is displayed:
S2722DGM
Refresh rate too low, please set refresh rate to 120Hz or higher to turn on MPRT.
Dell 27 Gaming Monitor
When the monitor enters the Standby mode, the following message is displayed:
S2722DGM
Going into Standby mode…
Dell 27 Gaming Monitor