Users Guide
Table Of Contents
- Safety instructions
- About your monitor
- Setting up the monitor
- Connecting the stand
- Using the tilt, swivel, and vertical extension
- Rotating the Display
- Configuring the display settings on your computer after rotation
- Connecting your monitor
- Organizing your cables
- Securing your monitor using Kensington lock (optional)
- Removing the monitor stand
- Wall mounting (Optional)
- Requirements to view or play HDR content
- Operating the monitor
- Troubleshooting
- Appendix
- Outline Dimension
26 | Setting up the monitor
Setting up the monitor
Connecting the stand
NOTE: The stand riser and stand base are detached when the monitor is
shipped from the factory.
NOTE: The following instructions are applicable only for the stand that
was shipped with your monitor. If you are connecting a stand that you
purchased from any other source, follow the set up instructions that were
included with the stand.
To attach the monitor stand:
1. Alignandplacethestandriseronthestandbase.
2. Openthescrewhandleatthebottomofthestandbaseandturnitclockwiseto
securethestandassembly.
3. Closethescrewhandle.
3
1
2