Users Guide
Table Of Contents
- Safety instructions
- About your monitor
- Setting up the monitor
- Connecting the stand
- Using the tilt, swivel, and vertical extension
- Rotating the Display
- Configuring the display settings on your computer after rotation
- Connecting your monitor
- Organizing your cables
- Securing your monitor using Kensington lock (optional)
- Removing the monitor stand
- Wall mounting (Optional)
- Requirements to view or play HDR content
- Operating the monitor
- Troubleshooting
- Appendix
- Outline Dimension
Setting up the monitor | 31
Connecting your monitor
WARNING: Before you begin any of the procedures in this section, follow
the Safety Instructions.
To connect your monitor to the computer:
1. Turnoyourcomputer.
2. ConnecttheDisplayPortorHDMIcable,andtheUSBcablefromyourmonitorto
thecomputer.
3. Turnonyourmonitor.
4. SelectthecorrectinputsourcefromtheOSDMenuonyourmonitorandthen
turnonyourcomputer.
NOTE: S2721DGF default setting is DisplayPort 1.4. A DisplayPort 1.1
Graphic card may not display normally. Please refer to “product specific
problems – No image when using DP connection to the PC” to change
default setting.
Connecting the HDMI cable
HDMI
HDMI