Users Guide

About your monitor | 11
8 Teams button & LED LED will light in static white when Microsoft Teams
®
is signed in and running.
LED will blink when there is a Teams notification.
Short press on the button to bring up Teams and
open notification. Ensure that the Teams application
is signed in and is already running at the background.
NOTE: For the Teams button to work, ensure that
the Teams account is provisioned / setup as ‘Teams
Only’ mode. The tenant administrator should enable
the account to ‘Teams Only’ mode.
NOTE: Teams button will only work with Teams
application in ‘Teams Only’ mode. Setting might vary
in corporate environment, resulting in Teams button
not working on the monitor. Please check with your
system administrator.
9 Hookswitch & LED LED will blink in green when there is an incoming
Teams/Skype for Business (SfB) call.
LED will light up in static green during Teams/Skype
for Business (SfB) call.
Short press to answer / end call.
Long press to reject incoming call.
10 Volume down & LED Short press for 2 unit volume decrement.
Long press for continuous volume decrement.
11 Volume up & LED Short press for 2 unit volume increment.
Long press for continuous volume increment.
12 Microphone mute &
LED
Press to mute and unmute microphone.
LED will light up in static red when mic is muted or
when the webcam & mic module is retracted.
LED will go dark when mic is enabled/unmuted.
13 Power LED indicator Solid white light indicates the monitor is turned
on and functioning normally. Breathing white light
indicates the monitor is in Standby Mode.