Users Guide
Table Of Contents
- Safety instructions
- About your monitor
- Setting up the monitor
- Connecting the stand
- Using the tilt, swivel, and vertical extension
- Rotating the Display (C2422HE/C2722DE only)
- Configuring the display settings on your computer after rotation (C2422HE/C2722DE only)
- Operating the monitor webcam
- Connecting your monitor
- Dell Power Button Sync (DPBS)
- Organizing your cables
- Securing your monitor using Kensington lock (optional)
- Removing the monitor stand
- Wall mounting (Optional)
- Operating the monitor
- Troubleshooting
- Appendix
Setting up the monitor | 53
Using DPBS function
Waking on the USB-C cable
• When you connect the USB-C cable, the Monitor/PC state is as follows:
New Power state of monitor (ON)*
Initial monitor power state (ON or Standby)
Initial monitor power state (ON or Standby)
New Power state of monitor (ON)
1 2
1 2
Initial system power state (OFF)
Initial system power state (ON)
New Power state of system (ON)*
New Power state of system (ON)
Connect USB-C
cable
Connect USB-C
cable
USB-C
* Not all Dell PC systems support to
wake up the platform via the monitor.
USB-C
USB-C
USB-C
USB-C
USB-C
Pressing the power button
• When you press the monitor power button or PC power button, the Monitor/PC
state is as follows:
New Power state of monitor (ON)
Initial monitor power state (OFF)
Initial monitor power state (ON)
1 2
1
2
Press PC/Monitor
power button
Press PC/Monitor
power button
Initial system power state (OFF)
Initial system power state (ON)
New Power state of system (ON)
USB-C
USB-C
New Power state of system (OFF)
USB-C
USB-C
USB-C
USB-C
USB-C
USB-C