Users Guide
Table Of Contents
- Safety instructions
- About your monitor
- Setting up the monitor
- Connecting the stand
- Using the tilt, swivel, and vertical extension
- Rotating the Display (C2422HE/C2722DE only)
- Configuring the display settings on your computer after rotation (C2422HE/C2722DE only)
- Operating the monitor webcam
- Connecting your monitor
- Dell Power Button Sync (DPBS)
- Organizing your cables
- Securing your monitor using Kensington lock (optional)
- Removing the monitor stand
- Wall mounting (Optional)
- Operating the monitor
- Troubleshooting
- Appendix
Setting up the monitor | 55
Connecting the monitor for USB-C Multi-Stream Transport (MST) function
(C2422HE/C2722DE only) in DPBS mode
A PC is connected to two monitors in an initially OFF power state, and the PC system
power state is in sync with Monitor 1 power button. When you press the Monitor 1 or
PC power button, both the Monitor 1 and PC turns ON. Meanwhile the Monitor 2 will
remain OFF. You need to manually press the power button on Monitor 2 to turn it ON.
USB Type-C
DP in
USB Type-C
System power state(ON)
Monitor 1Monitor 2
DP out
NOTE: Both monitors need to be Dell monitors which support DPBS function.
NOTE: It is not recommended to connect multiple C2422HE / C2722DE /
C3422WE in USB-C MST function in DPBS mode.
Similarly, a PC is connected to two monitors in an initially ON power state, and the
PC system power state is in sync with Monitor 1 power button. When you press the
Monitor 1 or PC power button, both the Monitor 1 and PC turns OFF. Meanwhile the
Monitor 2 will be in Standby mode. You need to manually press the power button on
Monitor 2 to turn it OFF.
USB Type-C
DP in
USB Type-C
System power state(OFF)
Monitor 1Monitor 2
DP out
Going into Standby mode...