Owner`s manual

System Board Components

Figure 1. Components Of The System Board

1. power button connector

2. Coin-cell battery

3. SATA connectors

4. password reset jumper

5. front-panel audio connector

6. PCI Express x16 slot

7. Mini-Card slot

8. PCIe x1 slot

9. 4–pin CPU power connecter

10. CPU Socket

11. processor fan connector

12. DDR DIMM memory slots (2)

13. ATX 24–pin power connector

14. front panel USB connector

15. front panel USB connector

16. CMOS jumper

Installing the System Board

1. Align the system board to the port connectors on the rear of the chassis and replace the system board in the

chassis.

2. Tighten the screws to secure the system board to the chassis.

3. Connect the power-supply unit cables to the system board.

4. Install the:

a) processor

b) heat-sink assembly

c) expansion card