Owner`s manual

108 | System Setup
Boot→ Boot Settings Configuration
Numlock Key Select power-on state for numlock.
Keyboard Errors Displays keyboard-related errors during boot.
USB Boot Support Allows you to enable or disable booting from
USB mass-storage devices.
Boot Mode Allows you to select the type of boot.
Secure Boot Control Allows you to enable or disable the secure
boot control.
NOTE: To enable this feature, the computer must be
in the UEFI boot mode and the Load Legacy OPROM
must be set to never.
Secure Boot Mode Allows you to select custom (clear secure boot
database) or standard (fixed secure boot policy)
secure boot mode.
Boot→ Clear Secure Boot Database
Manage All Keys (PK, KEK,
db, dbx)
Displays the keys in the database.
Delete All Keys Allows you to delete all the keys.
Reset All Keys Allows you to reset all the keys.
Load Legacy OPROM Allows you to load the legacy OPROM when in the
UEFI boot mode.
1st Boot Displays the first boot device.
2nd Boot Displays the second boot device.
3rd Boot Displays the third boot device.
4th Boot Displays the fourth boot device.
5th Boot Displays the fifth boot device.
Power
Wake Up by Integrated
LAN/WLAN
If enabled, will wake the system using a
network message.
AC Recovery Allows you to select the action the computer takes
when power is restored.
DeepSx Power Policies Allows you to configure the DeepSx mode.
OM_Book.book Page 108 Wednesday, April 3, 2013 1:39 PM