Switch User Manual

88 Dell PowerConnect 28xx Systems User Guide
2 Check the Remove checkbox next to an address.
3 Click Apply Changes . The address is deleted, and the device is updated.
Manually Allocating IP Addresses (Static Hosts)
The Static Hosts page is used to manually allocate IP addresses to network hosts. To open the Static
Hosts page, click System
 DHCP Server  Static Hosts in the tree view.
Figure 6-28. Static Hosts
• Host Name — Indicates the host pool name, which can be a string of symbols and an integer (for
example, piy4). The range is up to 32 characters.
•
IP Address — Specifies the IP address that was statically assigned to the host.
•
Network Mask — Specifies the pool’s network mask.
•
Prefix Length — Specifies the number of bits that comprise the address prefix.
•
Client Identifier — A unique identification of the client specified in dotted hexadecimal notation,
e.g., 01b6.0819.6811.72.
•
MAC Address — Specifies the MAC Address of DHCP static host.
•
Client Name — Specifies the name of the client, using a standard set of ASCII characters. The client
name must not include the domain name. The range is up to 32 characters.
•
Default Router — Specifies the default router for the DHCP static host.