Specifications

Documentation http://support.dell.com/support/edocs/systems/3007WFP/EN/about.h...

2 of 8 22.12.2006 23:55

1. Dell Soundbar mounting brackets — Attach the optional Dell Soundbar.

2. Security lock slot — Attach a lock to secure your monitor.

3. VESA mounting holes (100mm [Behind attached base plate]) — Use to mount the monitor.

4. Regulatory rating label — Lists the regulatory approvals.

5. Cable management hole — Organize cables by placing them through the hole.

6. Service tag label— Refer to this label if you need to contact Dell for technical support

7. Barcode serial number label

Lock down/release button — Push the monitor down, press the button to unlock the monitor, and then lift

the monitor to the desired height.

Bottom View

1. Power - Connect the power

2. Dell Soundbar power connector - Connect for the Soundbar (optional)

3. DVI connector - Connect your computer DVI cable

USB upstream port - Connect the USB cable that came with your monitor to the monitor and the

computer. Once this cable is connected you can use the USB connectors on the side and bottom of the

monitor.

USB downstream port - Connect your USB devices. You can only use this port after you have connected the

USB cable to the computer and USB upstream port on the monitor.

Side View