Owner's manual


E-Mail Alert

Purpose:

To configure detailed settings for E-Mail Alert. This page can also be displayed by clicking E-Mail Alert in the Left Frame.

Values:


SNMP

Purpose:

To configure the detailed settings of SNMP.

Values:

DNS
DNS Mode
Select the check box to get the DNS server address automatically from the DHCP server.
DNS Server ADDR
Sets the DNS server address.
LPD
Connection Time-Out
Sets the connection timeout period from 1 to 1000 seconds.
IP Filter
To set the IP Filter settings, click IP Filter. The "IP Filter" page is displayed.
Port9100
Port Number
Sets the port number from 9000 to 9999.
Connection Time-Out
Sets the connection timeout period between 1 and 1000 seconds.
IP Filter
To set the IP Filter settings, click IP Filter. The "IP Filter" page is displayed.
HTTP
Port Number
Sets the port number to 80 and 9000 to 9999.
Simultaneous
Connections
Displays the maximum number of connections received simultaneously by the client.
Connection Time-Out
Sets the connection timeout period from 1 to 255 seconds.
FTP
Password
Sets whether to enable or disable the password. And also specifies the password value up to seven characters.
Connection Time-Out
Sets the connection timeout period from 1 to 1000 seconds.
Primary SMTP Gateway
Sets the primary SMTP gateway.
Reply Address
Sets the IP address of the incoming server connected with SMTP protocol.
SMTP Server Connection
Displays the status of the SMTP server connection.
E-Mail List 1
Sets acceptable e-mail addresses for the E-Mail Alert feature up to 255 alphanumeric characters.
E-Mail List 2
Sets acceptable e-mail addresses for the E-Mail Alert feature up to 255 alphanumeric characters.
Select Alerts for List 1
Supplies Alerts
Select the check box to receive an E-Mail Alert for consumables.
Paper Handling Alerts
Select the check box to receive an E-Mail Alert for paper handling.
Service Call
Select the check box to receive an E-Mail AlertE-Mail Alert for Service Calls.
Select Alerts for List 2
Supplies Alerts
Select the check box to receive an E-Mail Alert for consumables.
Paper Handling Alerts
Select the check box to receive an E-Mail Alert for paper handling.
Service Call
Select the check box to receive an E-Mail Alert for Service Calls.
Community Name
(Read only)
*1
Specifies the community name to access (read only) the data up to 31 alphanumeric characters.
The original setting remains valid if no input is made. Characters entered for community Name in previous settings are not displayed
on the screen. The default Read Community is public.
Community Name
(Read/Write)
*1
Specifies the community name to access (read and write) the data up to 31 alphanumeric characters.
The original setting remains valid if no input is made. Characters entered for community Name in previous settings are not displayed
on the screen. The default Read/Write Community is private.