Users Guide

Plain 1
Sets the value of the reference voltage to the transfer roller for Plain 1.
Plain 2
Sets the value of the reference voltage to the transfer roller for Plain 2.
Transparency
Sets the value of the reference voltage to the transfer roller for Transparency.
Covers 1
Sets the value of the reference voltage to the transfer roller for Covers 1.
Covers 2
Sets the value of the reference voltage to the transfer roller for Covers 2.
Label
Sets the value of the reference voltage to the transfer roller for Label.
Coated 1
Sets the value of the reference voltage to the transfer roller for Coated 1.
Coated 2
Sets the value of the reference voltage to the transfer roller for Coated 2.
Envelope
Sets the value of the reference voltage to the transfer roller for Envelopes.
Init NVRAM
Purpose:
To initialize the NV (non-volatile) memory. After executing this function and rebooting the printer, all the
menu parameters are reset to their default values.
The NVRAM for the network feature cannot be initialized.
Values:
Initialize NVRAM and restart printer.
Click Start to initialize the NVRAM.
Clear Storage
Purpose:
To clear all files that are stored as Secure and Proof Print in the RAM Disk.
This item is only available when the optional memory card is installed. RAM Disk ON.
Values:
Clear Storage
Click Start to clear all files stored in the RAM Disk.
Non-Dell Toner
Purpose:
Specifies whether to use the refilled toner cartridge or not. When this setting is on, you can use toner
cartridges provided by other companies.
Values: