User Manual

Error messages Description
INSERT BOOTABLE MEDIA
The operating system is trying to boot to non-
bootable media, such as an optical drive. Insert
bootable media.
INVALID CONFIGURATION INFORMATION-
PLEASE RUN SYSTEM SETUP PROGRAM
The system configuration information does not
match the hardware configuration. The message is
most likely to occur after a memory module is
installed. Correct the appropriate options in the
system setup program.
KEYBOARD CLOCK LINE FAILURE
For external keyboards, check the cable
connection. Run the Keyboard Controller test in
Dell Diagnostics.
KEYBOARD CONTROLLER FAILURE
For external keyboards, check the cable
connection. Restart the computer, and avoid
touching the keyboard or the mouse during the
boot routine. Run the Keyboard Controller test in
Dell Diagnostics.
KEYBOARD DATA LINE FAILURE
For external keyboards, check the cable
connection. Run the Keyboard Controller test in
Dell Diagnostics.
KEYBOARD STUCK KEY FAILURE
For external keyboards or keypads, check the cable
connection. Restart the computer, and avoid
touching the keyboard or keys during the boot
routine. Run the Stuck Key test in Dell Diagnostics.
LICENSED CONTENT IS NOT ACCESSIBLE IN
MEDIADIRECT
Dell MediaDirect cannot verify the Digital Rights
Management (DRM) restrictions on the file, so the
file cannot be played.
MEMORY ADDRESS LINE FAILURE AT ADDRESS,
READ VALUE EXPECTING VALUE
A memory module may be faulty or improperly
seated. Reinstall the memory module or, if
necessary, replace it.
MEMORY ALLOCATION ERROR
The software you are attempting to run is
conflicting with the operating system, another
program, or a utility. Shut down the computer, wait
for 30 seconds, and then restart it. Run the
program again. If the error message still appears,
see the software documentation.
MEMORY DOUBLE WORD LOGIC FAILURE AT
ADDRESS, READ VALUE EXPECTING VALUE
A memory module may be faulty or improperly
seated. Reinstall the memory module or, if
necessary, replace it.
MEMORY ODD/EVEN LOGIC FAILURE AT
ADDRESS, READ VALUE EXPECTING VALUE
A memory module may be faulty or improperly
seated. Reinstall the memory module or, if
necessary, replace it.
31