Users Guide
Table Of Contents
- Safety instructions
- About your monitor
- Package contents
- Product features
- Identifying parts and controls
- Monitor specifications
- Plug and play capability
- LCD monitor quality and pixel policy
- Setting up the monitor
- Connecting the stand
- Connecting your monitor
- Organizing cables
- Securing your monitor using Kensington lock (optional)
- Removing the stand
- Wall mounting (optional)
- Operating your monitor
- Troubleshooting
- Appendix
About your monitor │ 19
Electrical specifications
Model S3222DGM
Video input signals HDMI 2.0 (HDCP), 600 mV for each differential line,
100 ohm input impedance per differential pair
DisplayPort 1.2, 600 mV for each differential line, 100
ohm input impedance per differential pair
AC input voltage/
frequency/current
100 VAC to 240 VAC / 50 Hz or 60 Hz ± 3 Hz / 1.6 A
(max.)
Inrush current 120 V: 30 A (max.) at 0°C (cold start)
240 V: 60 A (max.) at 0°C (cold start)
Power consumption 0.25 W (Off mode)
1
0.3 W (Standby Mode)
1
26 W (On Mode)
1
50 W (Max.)
2
28 W (Pon)
3
87.56 kWh (TEC)
3
1
As defined in EU 2019/2021 and EU 2019/2013.
2
Max brightness and contrast setting.
3
Pon: Power consumption of On Mode measured with reference to Energy Star
test method.
TEC: Total energy consumption in kWh measured with reference to Energy Star
test method.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components and
peripherals you ordered and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making
decisions about electrical tolerances or otherwise. No warranty as to accuracy or
completeness is expressed or implied.