User`s guide

Turn off the projector and disconnect the power cord.1.
Let the projector cool for at least 30 minutes.2.
Lossen the two screws that secure the lamp cover, and remove the cover.3.
Remove the two screws that secure the lamp.4.
Pull up the lamp by its metal handle.5.
Reverse steps 1 through 5 to install the new lamp.6.
Reset the lamp by selecting the left Lamp Reset icon in the OSD
Management
tab.
7.
Dell may require that lamps replaced under warranty are returned to Dell.
Otherwise, contact your local waste disposal agency for the address of the
nearest deposit site
8.
CAUTION: Do not touch the bulb or the lamp glass at any time. The bulb may explode due to improper handling, including the touching of the bulb or
the lamp glass.
Back to Contents Page
Installation: Dell 3200MP Projector User's Guide
5 of 5 2/24/2010
Click to buy NOW!
P
D
F
-
X
C
H
A
N
G
E
w
w
w
.
d
o
c
u
-
t
r
a
c
k
.
c
o
m
Click to buy NOW!
P
D
F
-
X
C
H
A
N
G
E
w
w
w
.
d
o
c
u
-
t
r
a
c
k
.
c
o
m