User`s guide

1 Directional pad
2 Enter button
3 Laser radiation caution
Power
See "
Power On/Off the Projector
."
Source
Press the Source button to choose Analog RGB, DVI, Composite, Component-I, S-video, and Analog YPbPr
sources.
R-Sync
If the remote control cover is open, the R-Sync button synchronizes the projector to the input source.
If the remote control cover is closed, the R-Sync button functions as the right mouse button.
Directional Pad
The directional pad can be used to control mouse movement when the remote control cover is closed. The mouse
function is enabled using the USB connector on the M1-A to combination VGA and USB cable between your
computer and the projector.
Laser
Aim the remote control at the screen, and press and hold the Laser button to activate the laser light.
Page Up
Press the PU button to page up.
Page Down
Press the PD button to page down.
Menu
Press the Menu button to activate the OSD. Use the directional pad and Enter button to navigate through the
OSD
.
Zoom In/Out
Press the In button to digitally magnify an image up to 32 times on the screen. Press the Out button to reduce the
zoomed image.