Computer Accessories User Manual

Configuring System Information 115
Figure 6-10. Add Authentication Key
3
Define the fields.
4 Click Apply Changes .
The SNMP authentication key is added, and the device is updated.
Displaying the Authentication Key Table
1 Open the SNTP Authentication page.
2 Click Show All .
The
Authentication Key Table opens:
Figure 6-11. Authentication Key Table
Deleting the Authentication Key
1 Open the SNTP Authentication page.
2 Click Show All .
The
Authentication Key Table opens.
3 Select an Authentication Key Table entry.
4 Select the Remove check box.
5 Click Apply Changes .
The entry is removed, and the device is updated.