Personal Computer User Manual

62 Drives
6 Follow the procedure in "After Working on Your Computer" on page 17.
7 Update the configuration information in the system setup program by
setting the appropriate
Drive option (0 or 1) under Drives . For more
information on using the system setup program, see the
Dell Technology
Guide
on your computer or at support.dell.com .
8 Verify that your computer works correctly by running the Dell Diagnostics
(see "Dell Diagnostics" on page 136).
Floppy Drive or Media Card Reader
Removing a Floppy Drive or Media Card Reader From the Mini Tower
Computer
WARNING: Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
WARNING: To guard against electrical shock, always unplug your computer from
the electrical outlet before removing the cover.
1 Disable the floppy drive or media card reader in the system setup program.
For more information on using the system setup program, see the
Dell
Tec hno lo g y Gu i d e
on your computer or at support.dell.com .
2 Follow the procedure in "Before Working on Your Computer" on page 9.
3 Remove the computer cover (see "Removing the Mini Tower Computer
Cover" on page 19).
4 Remove the drive panel insert by sliding the drive release latch downward.