Owner`s manual

44 | Removing the Coin-Cell Battery
Removing the Coin-Cell Battery
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the computer cover. See "Removing the Computer Cover" on page 12.
2 Remove the fan shroud. See "Removing the Fan Shroud" on page 14.
3 Remove the front bezel. See "Removing the Front Bezel" on page 23.
4 Remove the drive cage. See "Removing the Drive Cage" on page 26.
Procedure
1 Locate the battery socket (BT1). See "System-Board Components" on page 11.
2 Press the battery-release lever away from the coin-cell battery until the coin-cell
battery pops up.
3 Lift the coin-cell battery out of its socket.
1 coin-cell battery 2 securing clip
12
book.book Page 44 Monday, November 25, 2013 3:53 PM